Page 332 - 2022-23 Auto Performance Open Wheel Catalog

Oil Pressure Gauge Fittings
Special fittings, designed by Karl Kinser, get the oil pressure gauge line up where it is more accessible. Fitting is 1/8" NPT on engine end, while the gauge connection is -4AN.
In-Line Ball Valves
CNC-machined from billet aluminum,
then anodized for durability, Peterson’s
in-line-mounted ball valves have PTFE
seals and hard-coated aluminum balls
and bodies for long life and resistance
to corrosion from racing fuel. Valves are available with small bodies
in -6AN and -8AN sizes and large bodies in -10AN and -12AN sizes. A panel-mount ball valve (-6AN) is also available and is ideal for use as a dash mounted fuel shutoff.
PTR15-1040
Part No.
PTR15-1040 PTR15-1041
SB Chevy Lifter Valley Riser Tubes
PTR15-1050
Tubes install in the lifter drain-back holes to
prevent oil drain back while still allowing the
engine to “breathe”. 70-micron filter screens in the tube
opening protect from debris. Installation requires that the lifter
drain back holes be tapped to 1/4" NPT. Hex top is 9/16" and bottom is 1/4" NPT. Set of eight.
Fuel Fittings
Machined from aluminum and anodized, fittings have large bores and are radiused on the inlet sides for optimum flow.
PTFE Engine Seals
Hard-to-find PTFE engine seals assure maximum vacuum levels for engines with dry sump oil systems. Seals are manufactured by TKO Competition Development.
Part No.
PTR15-1002 PTR15-1004
Dry Sump Oil Tank
Mounting Brackets
Description
Fuel Regulator, -10AN x -8AN Port Fuel Regulator, -8AN x -8AN Port
SB Chevy Manifold End Rail Spacers
Mounting brackets are machined from billet alumi- num and include EPDM rubber-lined stainless steel straps. Sold in pairs.
Fill the gap between the manifold and the lifter valley end rails when using raised port cylinder heads on small block Chevy engines. Sold in pairs, spacers include four 3/16" roll pins for reten-
tion. Drilling of the block is required for installation.
Part No.
PTR09-1060 PTR09-1061 PTR09-1062 PTR09-1063
Oil Tank Heaters
Description
Spacer Set, .125" Thick Spacer Set, .187" Thick Spacer Set, .250" Thick Spacer Set, .375" Thick
Part No.
PTR08-0100 PTR08-0101
Description
For 6" Dia. Tanks For 9" Dia. Tanks
Dry Sump Tank Fittings
Anodized aluminum fittings complete the installation of any Peterson dry sump tank.
Part No.
PTR08-0501 PTR08-0502 PTR08-0503 PTR08-0504 PTR08-0505 PTR08-0506
Description
-10AN Hose x -12AN Port -12AN Hose x -12AN Port -16AN Hose x -12AN Port -6AN Port Plug (Tank Drain) -12AN Port Plug (Tank Drain) O-Ring Kit, -12AN (5 Per Pack)
Pre-heating of dry or wet sump systems on a race engine ensures good lubrication upon initial start-up. Immersion-style heat- er does a great job of pre-heating and only requires welding a threaded bung into the tank. Wrap-around styles can be glued to the outside of the tank or pan.
Remote Oil Filter Mounts
Manufactured from billet 6061-T6 aluminum for rigidity, remote mounts are offered to accept popular oil filters. Mounts include -12AN inlet and outlet ports, and a 1/8" NPT gauge port. Sold complete with fittings.
Part No.
PTR08-0300 PTR08-0302
Description
300-Watt Immersion Style, 110 Volt with Detachable Cord Set, Steel and Aluminum 1/2" NPT Weld Bungs
400-Watt Wrap-Around Pad, 4" x 10", 110 Volt with Detachable Cord Set, Attaches with High-Temp RTV Silicone
Part No.
PTR09-1301 PTR09-1302 PTR09-1312
Description
Accepts 13/16" Thread Chevrolet Filter, -10AN Fittings Accepts 13/16" Thread Chevrolet Filter, -12AN Fittings Accepts 3/4" Thread Ford Filter, -12AN Fittings
Lightweight Cap and Bung Assembly
PTR08-0611
Billet aluminum 1-7/16" cap and bung assem- bly is ideal when fabricating custom tanks. Cap is red anodized.
330
2022-23 PARTS AND ACCESSORIES
PTR15-1041
Description
90° Straight
Part No.
PTR09-0900 PTR09-0910 PTR09-0923 PTR09-0960
Description
Small Body Valve -6AN
Panel Mount Ball Valve -6AN Male Fittings Ball Valve, -8AN Male to -8AN Female Large Body Valve -12AN x -12AN
Part No.
PTRSM86410 PTRSM86586 PTRSM86587 PTRSM86625 PTRSM86990
Description
Rear Main Seal, SB Chevy 400 Jesel Front Cover, Chevy Cam Seal Jesel Front Cover, SB Chevy Crank Seal Rear Main Seal, SB Chevy 350 Front Crank Seal, SB Chevy