Page 453 - 2022-23 Auto Performance Open Wheel Catalog

SPRINT
Sprint 50" x 2-1/2" Front Axle
2 1/2" x .095" wall 4130 chromoly (tube) lightweight front axle. Jig- built for exacting quality and fit. Black powder coat or chrome plated.
Tel-Tach Mounts
Part No.
Sprint 50" x 2-1/4" Front Axle
Description
Tel-Tach mount utilizes the stock mounting
holes in the back of the tach to mount into the recessed cradle. Once mounted into the dash,
only the face of the tach protrudes. Quick-fas-
teners allow for easy removal when cleaning. Quick- springs are included. Available in aluminum and carbon fiber.
Part No. Description
MSD Box, Tach, and Kill Switch
Aluminum Mounting Plate
This aluminum mounting plate allows the MSD
ignition box, tachometer, and kill switch to be fastened to the dash with quick-turn fasteners using the stock mounting holes on each component. A clean and simple one-piece design.
TXRSC-FA-0004
Chrome, Lightweight
TXRSC-FA-0010
Black, Lightweight
TXRSC-BW-0702
Aluminum
TXRSC-BW-0702CF
Carbon Fiber
Plated 2-1/4" O.D. x .120" wall 4130 chromoly front axle is jig-built
for quality and fit. Axle weighs just 14-1/2 pounds, includes threaded Panhard bar stud and threaded shock mounts. Sold individually. Black powder coat or chrome-plated.
Part No.
Description
Part No.
Carbon Fiber Heel Riser
TXRCH-6335CF
Description
TXRSC-BW-0700
Flat Dash
TXRSC-BW-0701
Curved Dash
TXRSC-FA-0002
Chrome, Lightweight
TXRSC-FA-0008
Black, Lightweight
Sprint Car 51" Front Axle NEW!
Made from 2-1/2" diameter x 0.095" wall 4130 chromoly steel, this
51" axle is extended one-inch to the right, creating equal side-to-side lengths. 12/12 right and 8/9 left kingpin angles maximize handling. King pin bosses are reamed and includes threaded panhard bar stud and threaded shock mounts. Must use 47" tie rods.
This 1-1/2" tall x 4-1/2" wide heel riser
is lighter and stronger than aluminum.
Manufactured with a non-skid, grip tape top surface which helps keep driver's feet at the correct angle, eliminating fatigue.
Part No.
Description
Top Wing Tree
Top wing tree is made from plat-
ed 4130 chromoly steel. Tree has 1" adjustment holes with a total of 6" of adjustment. “X” design for lateral and horizontal strength. Sold individually, adjuster pins not included. Trees are offered in polished or black finishes.
Part No.
Aero Top Wing Trees
TXRSC-TW-0002
TXRSC-TW-0012
TXRSC-FA-0021
Chrome
TXRSC-FA-0021BLK
Black
Non-Winged Sprint Front Axle TXRSC-FA-0013 Chromoly 4130, 2-1/4" x .120" wall front axles are designed for
non-winged, dirt coil-over applications. Jig-built axles include a black powder-coated finish. Right-side shock mount is designed for cars with extended right side shock towers. Sold individually.
Description
53" x 2-1/4", Front Axle, Black, Torsion Bar
Sprint Car Rear Axle Spacer Kit
TXRSC-SU-9947
19-piece billet aluminum spacer kit contains all spacers needed to do both sides of the axle. Contents of the kit include (4) 1/4" spacers, (4) 1/2" spacers, (2) bearing shoulders, (2) inner cones, (2) outer cones, (2) 3/4" lightened spacers, (2) 1" lightened spacers, and (1) 2" lightened spacer.
Description
TXRSC-TW-0002
Top Wing Tree, Polished 18"
TXRSC-TW-0002-BLK
Top Wing Tree, Black 18"
TXRSC-TW-0033
Top Wing Tree, Polished 16"
TXRSC-TW-0033-BLK
16" Top Wing Tree, Black
TXRSC-TW-0012
Top Wing Tree Sliders, Plated 4130 Chromoly
TXRSC-TW-0012-BLK
Top Wing Tree Sliders, Plated 4130 Chromoly, Black
Plated 4130 chromoly top wing trees include aluminum adjusters with 3/4"
adjustment holes, and a total of
3" of adjustment. “X” design for
TXRSC-TW-0011-BLK
lateral and horizontal strength. Trees are offered in polished or black finishes.
Part No.
Wing Cylinder Clamp
Description
TXRSC-TW-0011
Polished Top Wing Tree
TXRSC-TW-0011-BLK
Black Top Wing Tree
TXRSC-TW-0994
Top Wing Tree Sliders for Aero Wing Tree
2022-23 PARTS AND ACCESSORIES
451
TXRSC-TW-5477BLK NEW!
Adjustable 1-1/2" diameter wing cylinder clamp. This
clamp will replace the welded-on cylinder mount on the chassis. Black anodized aluminum construction.