Page 1023 - 2020-2021 Catalogue

PAINTS
A-788 SPLASH ZONE
Two-Part Epoxy Repair Compound
Extremely hard, abrasion and impact resistant, two-part epoxy patching compound. It applies like putty to seal, fill, patch or rebuild aluminum, wood, concrete, fiberglass, & steel. It can be applied in or out of water to repair boat hulls, buoys, seawalls, docks, bridge abutments, & more. Splash Zone provides excellent protection against corrosion of metals and erosion and deterioration of concrete or wood. Splash Zone’s rock-hard surface can be drilled, tapped, or machined. Recommended for patching and repairing damaged underwater surfaces. Not for use in potable water.
BIO-BLUE - HULL SURFACE PREP 92
Bio-Blue Hull Surface Prep 92 is a powerful blend of cleaning agents and silica grit that de-waxes, etches, cleans, and prepares bare fibreglass for painting. Regardless of the boat’s age, the initial surface preparation is imperative. Residual parting agents utilized by the boat manufacturer to “pop” the boat from the mold may still be present, although not visibly apparent. This solvent-free product is designed to provide an easy and trouble-free method of removing unwanted contaminants, grease, wax, dirt, and mold release agents from fibreglass surfaces prior to painting. When used in conjunction with 6998 Skip Sand Primer or 6999 Sandless Primer and Antifouling paint, it is part of an easy 1-2-3 system of bottom paint.
• De-waxes, etches, cleans, de-greases and prepares bare fibreglass for painting
• Easy to use formula • Works on all fibreglass surfaces • Biodegradable with no VOC content • Part of an easy 1-2-3 system of bottom paint
ORDER NO.
50788-5001
50788-5002
Mfr. No.
A-788-SG2
A-788-HGS
Kit Size
2-Gallon Kit
1/2-Gallon Kit
EZ TEX MARINE EPOXY REPAIR COMPOUND Multi-Purpose Epoxy Repair Kit • Easy to use 1:1 mix ratio epoxy repair compound
for fixing cracks, gouges, voids & holes • High strength formula makes repairs permanent • 100% Waterproof when cured – Can be used
above & below the waterline • Will not sag, shrink or run • Can be sanded, drilled, tapped, sawed and painted once cured
ORDER NO.
50092-5002
Mfr. No.
92-Qt
Description
Bio-Blue, Quart
ORDER NO.
57100-5004
57100-5016
Mfr. No.
7100-4OZ
7100-16OZ
Size
4 oz.
16 oz.
PROP COAT BARNACLE BARRIER SPRAY
Protects Underwater Metals. Prop Coat Barrier Spray 1792 provides easy to use aerosol spray protection for bare metals including steel, stainless steel, cast iron, copper, bronze, galvanized steel, and lead. It forms an excellent bond to underwater metals and running gear, and inhibits corrosion on these surfaces. Prop Coat Barrier’s smooth, hard surface will self-clean in service, and
can be used above or below the waterline. The dried film of Prop Coat contains 93% pure zinc. Not for use on aluminum surfaces. • Superior underwater metal protection • Excellent adhesion to clean metals • 93% pure zinc in the dried film • Fast dry formula in an easy to use aerosol spray can
EZ-POXY PERFORMANCE ENHANCER Topside Finish Performance Enhancing Additive • Provides exceptional durability, hardness,
gloss, gloss retention, scratch resistance,
and longevity of Pettit solvent based topside finishes • Provides durability and gloss of linear polyurethanes
with the ease of use of enamels
and one-part polyurethanes • Increases flow out of brush strokes and roller stipple,
providing a mirror-like high gloss finish ORDER NO. Mfr. No. Size
53021-5000 3021 236 ml (8 oz.)
ORDER NO.
51792-5000
Mfr. No.
1792
Size
454 gram
For more information see: www.pettitpaint.com
997