Page 1201 - 2020-2021 Catalogue

FUEL TANK ACCESSORIES
90° P-TRAP FUEL TANK VENT
This vent helps prevent water from entering the fuel tank, yet allows air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. For 5/8" ID hose. Meets ABYC Standard. The arrows in this cross-section show the baffled route that the water would have to travel in order to reach the fuel vent hose. Compatible with Ethanol blended fuels.
ORDER NO. Mfr. No.
101-16700 1670-3
106-66419-3 66419-3
Max. Hull Thickness
9/16"
9/16"
Installation Hole Size
3/4"
3/4"
Style
Black w/ Black Vent Head
Black w/ Stainless Steel Trim Cover
106-66419-3
101-16700
FUEL VENT - FLUSH MOUNT 90˚- Enhanced 316 Stainless Steel Vent On the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage — or be damaged by — hull bumps and scrapes. Cap unscrews with hex head wrench for easy cleaning of filter and pressure testing of entire fuel system. These vents now include two silicone gaskets.
ORDER NO. Mfr. No. Hose Size I.D.
106-66032-3 66032-3 5/8"
FUEL VENT - STRAIGHT
Enhanced 316 stainless steel • With Spark-Proof Screened Holes
ORDER NO. Mfr. No. Hose Size I.D.
106-66004 66004-3 5/8"
Max. Hull Thickness
7/8"
Max. Hull Thickness
1/2"
Installation Hole Size
1-3/8"
Installation Hole Size
7/8"
Max. Hull Thickness
7/8"
POLYPROPYLENE FUEL TANK VENT
Patented splash-resistant, corrosion-resistant polypropylene
ORDER NO. Mfr. No. Colour Hose Size I.D.
101-16070 1607-3 White 5/8"
FUEL VENT LINE SURGE PROTECTOR
Avoid Fuel Spills and Fines!
Installation Hole Size
3/4"
• Helps prevent vent line spills due to tank sloshing and refueling. • Installs easily into existing built-in 5/8" vent lines. • Avoid environmental damage and federal fines for fuel spills! Mfr. No. 1675-6 ORDER NO. 101-16750
For more information see: www.attwoodmarine.com
GAS TANK VENT
Die Cast Zinc Chrome Plated
A = 3/4" B = 1-3/4" C = 5/8" Hose D = 1" Mfr. No. 352110-1 ORDER NO. 423-52110
GAS TANK VENT 90˚
Machined Brass Chrome Plated
A = 7/8" B = 2-3/8" C = 5/8" Hose Mfr. No. 352030-1 ORDER NO. 423-52030
GAS TANK VENT
Die Cast Zinc Chrome Plated
A = 1" B = 2-1/8" C = 5/8" Hose D = 1-1/8" Mfr. No. 352100-1 ORDER NO. 423-52100
For more information see: www.sea-dog.com
1175