Page 224 - 2020-2021 Catalogue

FUEL FILTERS
MARINE RATED HOSE
Parker Marine Hose is a USCG-rated hose for gasoline, diesel, lube oil, and hydraulic systems for commercial and recreational applications. As you’d expect, it delivers test-proven performance in a wide operating temperature range and constant working pressure. It is of a long-lasting reinforced construction, kink and cut resistant, and compatible with a variety of standard 100R5 fittings.
Working Pressure: 500 PSI ** Burst Pressure: 2000 PSI
ORDER NO.
Mfr. No.
Hose Length
Hose I.D.
Hose O.D.
Min. Bend Radius
209-99906-50
CGH-6-50
50 Ft
5/16" (.8 cm)
0.7" (1.8 cm)
1-1/4" (3.2 cm)
209-99908-50
CGH-8-50
50 Ft
13/32" (1.0 cm)
0.8" (2.0 cm)
1-3/4" (4.5 cm)
209--99910-50
CGH-10-50
50 Ft
1/2" (1.3 cm)
0.9" (2.3 cm)
2-1/4" (5.7 cm)
209-99912-50
CGH-12-50
50 Ft
5/8" (1.6 cm)
1.1" (2.8 cm)
2-3/4" (7.0 cm)
209-99916-50
CGH-16-50
50 Ft
7/8"” (2.3 cm)
1.2" (3.0 cm)
3-1/2" (8.9 cm)
ACCESSORIES
VACUUM/COMPOUND GAUGE KITS
Vacuum and Compound (vacuum/pressure) gauges and related hardware are available to monitor filter condition. As the filter slowly becomes clogged with contaminants the restriction (resistance to flow) increases. The fuel pump still tries to draw fuel (suction) but because of this restriction less fuel is delivered to the engine and instead more air is pulled from it (fuel degassing). These results can cause the engine to lose power and eventually stall. By installing a vacuum gauge in your fuel system (on the outlet side of the Racor filter) visual monitoring of filter condition is possible at a glance. Note the position of the dial, or apply the ‘red line’ decal provided with most kits. This will assist in easy monitoring as filter efficiency begins to decrease when a filter change is necessary.
ORDER NO.
Mfr. No.
Description
Thread Size
209-19668
RK19668
Vacuum Gauge, -30 to 0 "Hg, 1/4" NPT, Panel Mount (2) Brass Fittings
1/4" NPT
209-19669
RK19669
Vacuum Gauge, -30 to 0 "Hg Bottom Mount
1/4" NPT
209--19671
RK19671
Stainless Steel T-handle Vacuum Gauge Kit fits 900 &1000 and 2002 to present 500 Turbine Series fuel filter/water separators, including UL marine listed models. Gauge, Vacuum -30 to 0 "Hg Bottom Mount. Improved cases feature a pressure relief valve.
9/16-18 UNF-2A
209-19668
209-19669
209-19671
BOWL WRENCH
DIESEL MARINE SHUT-OFF VALVE
T1 This side to bowl
T2 Drain Side
DRAIN KIT, SELF-VENTING
Applications (Marine Series) (Marine Turbine Series)
Marine 800 Series, Turbine-500MA-503MA, Turbine-900MA-903MA, Turbine-1000MA-1003MA Turbine-73100MA, 75500MAX, 75900MAX, 751000MAX, 771000MA, 791000MAV
Thread: T1 1/4”-18 NPT (male) T2 1/4”-18 NPT (female)** Material: Brass Notes: T2 port includes 1/4”-18 NPT plug.
Plug must be in valve unless servicing. Mfr.No. RK 19492
ORDER NO. 209-19492
Application: Turbine - 500FG
Mfr.No. RK 30488
ORDER NO. 209-30488
Racor offers a hand wrench to remove all metal and see-thru Spin-On bowls that feature external ribs. By simply fitting the wrench over the bowl ribs, the bowl can be removed from the replaceable Spin-On element, or filter housing with little effort. The wrench is made of a corrosion proof, high-impact, high-strength engineered polymer. One bowl wrench per kit.
Mfr.No. RK 22628
ORDER NO. 209-22628
For more information see: www.racornews.com
198