Page 232 - 2020-2021 Catalogue
P. 232
INSTRUMENTS
HEAVY DUTY SERIES
80514P
HEAVY DUTY A classic line for inboards including diesels, Heavy Duty includes mechanical water temperature and oil pressure gauges, ammeters, engine sync gauges* and a range of diesel tachometers, including a programmable tach/hourmeter. *Module required, not included with gauge.
FEATURES:
80150P
•
• • • • • •
Classic white graphics and pointer on deep black faces. Low-profile polished stainless steel bezels. Perimeter lighting and scratch resistant glass lenses. Tachometers for diesels available.
Several temperature and mechanical oil pressure gauges available. Programmable tach/hourmeter offered. Ideal replacement for Stewart-Warner® “Deluxe” instruments. Optional add-on eyebrow or square bezels available
(See Page 230 for details).
GAUGE DESCRIPTION SIZE
Ammeters: Direct Reading 40 Amp Range 2” Direct Reading 60 Amp Range 2”
Engine Synchronizer Gauge: 2”
Fuel Gauge: 2”
Hourmeter: 2”
DIAL RANGE
40-0-40A 60-0-60A
Port-Starboard
E-1/2-F
10,000 Hrs.
0-80 PSI 0-100 PSI
140-320° F
10-60 MPH 10-60 MPH
0-3500 RPM 0-3500 RPM 0-3500 RPM 0-6000 RPM
120-240°F 100-280
10-16 VDC 20-32 VDC
SENDER CODE
NONE REQ’D. NONE REQ’D.
REQUIRES “L’
REQUIRES “F”
NONE REQ’D.
REQUIRES “C” REQUIRES “C”
REQUIRES “E”
INCLUDES “G”
SEE “T” REQUIRES “B” SIGNAFLEX O/B ALT./COIL
REQUIRES “D” REQUIRES “P”
NONE REQ’D. NONE REQ’D.
PART NUMBER
80712P 80710P
80730P
80150P
82760P
80180P 80181P
80596P
80514P 80514PH
82302P 82303P 82301P 82288P
80590P 80593P
80134P 80131P
ORDER NUMBER
043-80712 043-80710
043-80730
043-80150
043-82760
043-80180 043-80181
043-80596
043-80514 043-80514-1
043-82302 043-82303 043-82301 043-82288
043-80590 043-80593
043-80134 043-80131
Oil Pressure Gauges (Electric): Oil Pressure 80 PSI Oil Pressure 100 PSI
Oil Temperature Gauge (Electric): Oil Temperature 320°F
2” 2”
2”
Speedometer Kit: 60 MPH (Pitot Type) 3” 60 MPH (Pitot Type) Head Only 3”
Tachometers (Electric): Diesel Alternator** 3” Diesel Magnetic Pickup, 90-180 Teeth 3” Diesel Signaflex *** 3” O/B & 4-Stroke Gas Engines* 3”
Water Temp. Gauge (Electric): Water Temp 240°F 2” Water Temp 280°F, Nylon 2”
Voltmeters-12 & 24 Volt: 12 Volt System 2” 24 Volt System 2”
* Mariner 30 & 40 HP (2-cylinder) engines require a module (Mercury P/N 17461A2) when using any of these tachometers. Not tested for non-original-equipment (aftermarket) ignition systems. Not for diesels. ** May require alternator tap. *** Signaflex senders and drive tips are for domestic diesel engines only (not for Lehman, Renault, Volvo, Yanmar, etc.) **** Use suitable hose or tubing. NOT available from Seastar Solutions.
␣ Supplied with a black bezel. Cutouts: 3" Gauge 3-13/32", 2" Gauge 2-1/8"
For more information see: www.seastarsolutions.com
206
