Page 641 - 2020-2021 Catalogue
P. 641
BOAT HULL CARE
ScrubbisTM Underwater Hull Cleaning Kit is a maintenance product that pays you back. Cleaning the
underwater surface of your boat regularly makes the boat faster, saves you money on fuel, and is environmentally sound. With a 12-foot reach, the Scrubbis Underwater Hull Cleaning Kit allows the boat owner to reach rudders, keels and all
underwater surfaces on boats up to 40-feet and bigger. It is designed for use in both fresh and salt water, for power or sail. Cleaning the hull a few times a month removes bottom growth before it ‘sets’ and removes less paint than cleaning the hull after bottom growth has completely attached itself. Further savings are realized by not hiring a diver to clean your boat. All Scrubbis parts can be recycled. The buoyant cleaning head and curved ergonomic design reduce the labor involved in cleaning underwater surfaces. Flotation does half the job for you! A 30-foot boat can typically be cleaned in 20-30 minutes or less at the dock, on the mooring, or from the dinghy.
UNDERWATER HULL CLEANING KIT
Complete kit for cleaning the boat’s hull while it remains in the water. Use with the extension pole (included in the kit) for a total reach of 126" (3.2 m). With a 12-foot reach, the Scrubbis Underwater Hull Cleaning Kit allows the boat owner to reach rudders, keels and all underwater surfaces on boats up to 40-feet and bigger.
The Kit Includes:
• Buoyant foam head with cleaning fins. 4.4 lbs of buoyancy
(2 kg) powers scrubbing on the upstroke • Use for both, power and sailboats in salt or fresh water. • Curved ergonomic tube • Telescoping pole extending from 43–86 in. (1.1–2.2 m) • Extension pole for a total length of 12.5 ft. (3.8 m) ORDER NO. 510-04400 Mfr. No. 4400
WATERLINE BRUSH
Scrubbis Waterline Brush uses buoyancy to minimize the effort of cleaning waterline stains and growth just above and below the waterline. One side features soft cleaning fins to knock off soft growth and the other side features a gentle ‘doodlebug’ pad that is held in place using hook and loop fasteners.
Hook and loop allow the boat owner to replace this scrubbing pad with any off-the-shelf pad. Use Davis Scrubbis Waterline Brush along with Davis FSR-Fiberglass Stain Remover (see products #790 or #792) to remove yellow waterline stains, rust stains, or other stains that accumulate along the waterline in both fresh or salt water.
ORDER NO. 510-04410
Mfr. No. 4410
REPLACEMENT TELESCOPING POLE
Scrubbis Replacement Telescoping Pole is purchased alone for use with the Waterline Brush, or as a direct replacement for the pole that is included in the Underwater Hull Cleaning Kit. Adjusts from 43 to 86 inches (1.1 to 2.2 meters) and made of clear anodized marine-grade aluminum tubing.
ORDER NO. 510-R4400B
Mfr. No. R4400B
GROOVY SCUBBIS
Davis Scrubbis Groovy Scrubbis is an add-on interchangeable accessory for the Underwater Hull Cleaning Kit. Switch it out with the blue cleaning head that comes with the complete kit. Groovy Scrubbis is designed to handle the tough bottom growth that is aggressively attached to the boat’s hull, including algae, slime, grass, barnacles and worm castings.
Groovy Scrubbis is easily interchangeable with the blue cleaning head that comes with the Underwater Hull Cleaning Kit (Davis #4400). ORDER NO. 510-04420 Mfr. No. 4420
REPLACEMENT HULL CLEANING HEAD Scrubbis Replacement Cleaning Head is a direct replacement for the cleaning head that comes with the Underwater Hull Cleaning Kit.
The blue cleaning head will eventually wear out and it can be recycled when it does. This Davis Scrubbis cleaning head features both soft fins and a harder cleaning fin, along with buoyancy of 2 kg (4.4 lbs) to minimize the effort of cleaning the boat’s hull underwater. Flotation does half the job for you! ORDER NO. 510-R4400A
Mfr. No. R4400A
FSRTM FIBERGLASS STAIN REMOVER
• FSR (Fiberglass Stain Remover) is a unique stain absorbing gel that is thick enough to cling to vertical surfaces. ideal for removing oil, rust, exhaust, yellow waterline and transom stains. Works like magic to clean up fiberglass stains!
Approved for use by the US Navy.
ORDER NO. 510-00790 Mfr. No. 790 Size: 16 oz.
FSRTM BIG JOB
ORDER NO. 510-00792 Mfr. No. 792 Size: 67.8 oz. (2.0 Liters)
For more information see: www.davisinstruments.com
615