Page 748 - 2020-2021 Catalogue

VENTS/SOLAR VENTS
COWL VENTILATOR WITH FLANGE
For use with 3" I.D. wire-supported ventilation hose. Comes with flexible hose flange for simple, secure insertion into the deck hole. Flange is screwed onto hose, then the vent snaps easily onto the flange. Vent constructed of chrome-plated die-cast Perma- Plate® ZAMAK. Flange is non- corrosive plastic.
• Dimensions: 5-5/16" wide x 6" long x 2-1/4" high (neck extends 1" below deck)
• Installation hole size: 3-1/4" to 3-1/2" diameter
• Pre-drilled with three holes for #8 screws ORDER NO. 101-13640 Mfr. No. 1364A3
For more information see: www.attwoodmarine.com
COWL VENTILATOR
Chrome Plated Zinc Alloy Cowl with Black Polymer Base. 3" Duct Threads into Neck, Hose Clamps Not Required. Overall Length: 5-3/4" / Overall Width: 4-3/8" Overall Height: 2-5/8" / Mouth Opening: 8 sq. ins.
Screw Size: #8
ORDER NO. 621-13120
Mfr. No. 1312DP0CHR
For more information see: www.perko.com
DRAIN ANCHOR THRU HULL VENT
Drain Anchor for 5/8” hose, white. Has thread for thru-bolting, fits 3/4” hole. • Dimensions: 1.25" H x 1.1" W x 2.8" L Sold Pack of 2 ORDER NO. 080-09024 Mfr. No. 09024
For more information see: www.sceptermarine.com
TWIST-ON HOSE FLANGE
For use with 3" I.D. wire-supported ventilation hose. Unique design allows hose installation from topside by simply turning the flange into the hose spiral, passing the hose through the deck hole, then mounting ventilator. The connection is secure with no hose clamps needed. Non-corrosive plastic construction. • Installation hole size: 3-1/4" - 3-1/2" diameter • Pre-drilled with four holes for #10 screws ORDER NO. 101-14050 Mfr. No. 1405-3
For more information see: www.attwoodmarine.com
FLUSH VENT
Injection Molded ABS
STORAGE VENT
Used to vent lockers and storage areas. Does not accept a ventilation hose. For mounting above the rub rail only. Installs easily to provide 3" diameter transom vent. Plastic construction will not corrode or discolour. • Provides over 6 square inches of ventilation opening • Overall dimensions: 3-13/16" flange diameter,
1-1/16" high, 5/8" neck • Installation hole size: 3-1/16" to 3-1/8" diameter
ORDER NO. 101-13530
Mfr. No. 13531
A B
C
HOLE SIZE
VENT AREA
FASTENER
COLOR
Mfr. No.
ORDER NO.
3-9/16" 3-3/4"
4-15/16" (Overall)
Up to 4"
4.05in2
# 8 FH
Black
337426-1
423-37426
THRU VENT
Injection Molded Polypropylene
Hose/Hole Size: 3" Vent Area: 3.04in2
ORDER NO.
423-37310
423-37320
FASTENER: #8 FH
Mfr. No.
337310
337320
(OVERALL)
B C
5/8" 3-5/8"
5/8" 3-5/8"
Int. Colour
LOW PROFILE COWL VENT/ SNAP-ON DECK PLATE Dip Molded PVC ORDER NO. Diameter
Colour
White
Black
STANDARD COWL VENT/ SNAP-ON DECK PLATE Dip Molded PVC ORDER NO.
A
2-13/16"
2-13/16"
Height
Height
Int. Colour
Red
Mfr. No. Diameter
427-27130 3"
427-27142 4"
5"
427-27135
427-27147
727135-3 3" 7-3/4" Red
727147-3 4" 9-1/4" White
5-7/8"
White
722
For more information see: www.sea-dog.com