Page 811 - 2020-2021 Catalogue

STATIONARY DOCK HARDWARE
HOWELLTM STATIONARY DOCK HARDWARE ENGINEERED FOR STRENGTH, DURABILITY & SIMPLICITY.
Hardware Placement Guide Correct Usage of Hardware with Backer Plates
31/2”
440-86105
Connector Hinge Kit. 3/16" thickness
2”
• All Stationary Dock Hardware is 1/8" (nominal) Hot Dipped Galvanized Steel with 7/16" Holes for 3/8" Carriage Bolts.
51/4”
3”
21/2”
5 7/8”
51/4”
31/4”
23/8”
51/4”
111/2”
51/4”
440-75000 CornerLeg Holder. Mounts on inside corner of framework.
51/4”
57/8”
440-75010 Side Leg Holder. Can be mounted inside or outside of the dock frame.
57/8”
51/4”
440-75050 CornerPlate. Used on inside corners for increased strength.
57/8”
51/4”
440-75220 Anchor Tie Down Corner. Used to secure dock in place. May also be used as inside corner for added strength.
440-86106
Connector Hinge
21/4” i.d.
440-91119 AnchorChain Corner. 3/16" thickness. Universal hole placement.
440-95123 Washer Plate
1”
25”
5”
21/2”
21/4” 5”
51/2”
51/4”
440-75020 BasePlate. Used as a footing. May be bolted to a 2" x 6" piece of lumber and joined to an adjacent base plate for stability.
43/4”
440-75030 Connector Hinge. 440-75100 Leg Brace Set. Used to join dock sections or a fixed Extends up to 72". Use with Leg
440-10320 Leg Cap. Use to cover raw leg pipe edges.
Gives dock the finishing touch. (4 per pack)
21/2”
1/2 11/4” 2” 1/4
11”
440-75090 CornerLegBrace Holder. Use when attaching a 440-75100 Leg brace from corner to side legs for stability.
43/4”
11/4”
440-75080 Leg Brace Holder. Use with Leg Brace Set to connect leg pipes for stability. (Double)
440-94102 Bottom Pad. 440-95122 Joist Corner. Use for soft bottom applications. Used to reinforce stringer joints.
Allows leg pipe to extend through to lake bed for lateral support. Pointed corners.
LEG PIPE SAND AUGER 440-94200 • Rugged Cast Iron • Fits up to 2" O.D. pipe • Easily penetrates sandy or soft sediment as
well as packed surfaces
Always use backer plates and carriage bolts and sandwich the framing lumber between hardware. Lag bolts alone will fail over time.
For more information see: www.dockedge.com
ramp to the dock at varying angles. Includes hinge pin.
51/4”
Brace Holders to connect legs for stability.
21/4”i.d.
51/4”
440-75150 BackerPlate. Prevents pipe from deforming wood causing bolt loosening and dock shifting.
6’-81/4” 10’
17/8”o.d.
440-93168 (6' 8") & 440-75280 (10') Galvalume Leg Pipe.
11/8” 5 ”
785