Page 933 - 2020-2021 Catalogue

BILGE PUMP ACCESSORIES
3-WAY PANEL LIGHTED SWITCH (12 VDC) Controls any pump equipped with an automatic float switch. Toggle has three positions: (automatic, off and manual) and has a spring return to “off” from the “manual” position. Panel is black stainless steel and has red indicator light and fuse holder.
ORDER NO. 272-00041
Model 41
PANEL SWITCH SPECIFICATIONS
3-WAY PANEL SWITCH (12/24/32VDC) Similar to the Lighted Panel Switch but without indicator light or fuse holder. The “manual” position has a “fail-safe” spring return to “off” so you can’t leave your pump running by accident. Black stainless steel panel.
2-WAY PANEL SWITCH (12/24/32VDC) Attractive black stainless steel panel highlights your control panel. Simple “on” or “off” positions provide fingertip control.
Size (Inches)
3-1/4" x 2"
2-1/4" x 2"
2-1/4" x 2"
ORDER NO. 272-00045
Model 45
ORDER NO. 272-00049
Model 49
ORDER NO.
272-00041
272-00045
272-00049
Mfr. No. Description
41 3-Way Panel Light Switch
45 3-Way Panel Switch
49 2-Way Panel Switch
Volts(DC)
12
12/24/32
12/24/32
Max Amps (DC)
20
20
20
90° ELBOW ADAPTERS
90˚elbow adapters are designed for rigid pipe installations of Sump and Utility Pumps. Adapters snap onto discharge port. Opposite end is female pipe threaded. High impact plastic will not rust, corrode or discolor.
ADAPTERS
Designed to be used with Rule Pumps and thru-hulls. Heavy-duty molded, non-corrosive, high impact plastic.
ORDER NO. Mfr. No.
272-00063 63
272-00067 67
Description
Bulkhead adapter - adapts 1-1/2" hose to standard garden hose fitting.
Hose adapter - adapts 1-1/2" outlet to 1-1/8'' hose
Garden hose adapter - adapts 1-1/8" outlet to standard garden hose fitting.
Double stepped straight adapter for adapting 1-1/8'' outlet to 3/4'' or 5/8'' I.D. hose.
ORDER NO.
272-00057
272-00058
Mfr. No.
57
58
Description
Adapts all Rule Pumps with 1-1/8" outlet to 1" NPT
Adapts all Rule Pumps with 1-1/2" outlet to 1-1/4" NPT
272-00068
68
69
272-00069* *Not suitable for Rule-Mate Pumps
STAINLESS STEEL DEBRIS STRAINER Extra measure of protection for use on round based Rule pumps up to 3700 GPH (14010 LPH). Installs directly into existing strainer. Filters out excess debris and helps prevent jamming and failure.
ORDER NO. 272-00070 Mfr. No. 70
UNIVERSAL PUMP ADAPTER
Allows all Rule 360 (1360), 500 (1893), 800 (3028) Round and 1100 GPH (4164LPH) pumps to be mounted to competitive bases: Attwood® V-500, Mayfair Proline 500 (1983), 750 (2839), 1000 (3785), and West Marine 500 (1983), 750 (2839) and 1000 GPH (3785 LPH) models.
ORDER NO. 272-00071
Mfr. No. 71
For more information see: www.xylem.com
LEVELGUARD HIGH WATER ALARM
w/ Field-Effect Sensors - Voltage Rating 10.5 to 14.4 VDC
Bulkhead adapter 1-1/2" Hose to 3/4" Garden Hose. # 272-00063
Hose Adapter for 1-1/2" pump outlet to 1-1/8" hose # 272-00067
Garden Hose Adapter # 272-00068
Double Stepped Straight Adapter # 272-00069
A simple, effective solution to protect against bilge flooding. With a loud dBA piezo horn and LED light display, this high-water alarm will alert to flooding and keep passengers, valuables and electronics safeguarded. • No mechanical float switches or moving parts to jam, fail, or wear out • No exposed metal probes and no electrical contacts to corrode and fail • No seals to leak • Clean, flush-mounted alarm panel is styled
to fit most decorative marine themes • Easy installation, required 1 amp fuse on positive lead
to sensor • Complies with Coast Guard rule (CFR 182.530)
www.levelguardproducts.com
requiring vessels 26' (7.9 m) or more to have an audible bilge alarm • CAUTION: Do NOT connect through ignition
907
ORDER NO. 630-26401 Mfr. No. Z26401RK