Page 945 - 2020-2021 Catalogue

BILGE ACCESSORIES
HYDRO AIR SWITCH
Ultra reliable bilge switch, which will automatically operate bilge pumps once water level reaches 2-1/4" (55mm). As water rises in the bilge, air pressure in the bell and tube increases, operating a diaphragm switch in the switch unit.
All electrical components are clear of the water and no sensitive electronics are used. • Proven highly reliable design using new moulding
techniques. • Styling compliments modern interiors. • Automatic operation of bilge pumps or audible and
visual high water level alarms. • Turns on at 2-1/4" (55mm), off at 1" (25mm). • Diaphragm switch can be mounted up to 10ft (3m)
above plastic airbell.
Size: Switch - 6" long x 1-3/4" high x 3" wide (15.3cm x 4.5cm x 7.5cm) Airbell - 2-3/8" long x 1-1/4" wide x 4" high (6cm x 3cm x 10cm)
ORDER NO. 59400-0012
Hydro Air Switch for 12 Volt DC, up to 20 amps.
ORDER NO. 59400-0024
Hydro Air Switch for 24 Volt DC, up to 10 amps.
REPLACEMENT PARTS ONLY “OLD STYLE” PUMPGARD IN-LINE STRAINERS - (Screw on top of Bowl)
BILGE PUMPGARDTM STRAINER
• Strainer protects all electric diaphragm bilge pumps. • Prevents unnecessary pump breakdowns caused by
particles in the water. • Transparent housing allows instant inspection. • 46200-0000 model installs in-line between bilge pick up and pump. • Quick in-place cleaning of the 20 mesh stainless steel screen. Fitting: Connections for 3/4" (19mm) ID hose. Size: 4-3/4" long x 2-3/4" wide x 2-1/2" high (12cm x 7cm x 6cm).
ORDER NO. 46200-0000
Model for 3/4" (19mm) ID hose.
ORDER NO. 46200-0010
3/4" (19mm) ID hose x Plug-in 90°
Replacement Screen
O-Ring
Clear Bowl
For In-Line Bilge
ORDER NO.
36139-0000
36403-0000
Not Available
For Water Systems
ORDER NO.
36138-0000
36403-0000
Not Available
NOTE: Older Style PUMPGARD STRAINERS are now replaced by the newer version with the bowl threaded to the base.
For more information see: www.xylem.com
IN-LINE STRAINER
Injection Molded Polypropylene Body/Polycarbonate Lens with Stainless Steel Filter Screen.
Removable clear lens for ease of cleaning and changing filter. Filter is interchangable with Par Jabsco®. Filter should be mounted above water level line and on suction side of pump.
ORDER NO.
423-64135
423-64137
Mfr. No.
364135
364137
Screen Size
50 Mesh
1/16” Mesh
A
3-9/16”
3-9/16”
B
4-1/16”
4-1/16”
C
2-9/16”
2-9/16”
D Fastener
1/2” Hose #10 RH
3/4” Hose #10 RH
For more information see: www.sea-dog.com
919