Page 950 - 2020-2021 Catalogue

WATER PRESSURE PUMPS
PAR-MAXTM 1 PRESSURE CONTROLLED PUMP - 12 VOLT - TWO CHAMBER
• Efficient, self-priming pump serving 1 outlet • Two chamber opposed double diaphragm design • Self-priming up to 1m vertical lift • Runs-dry without damage • Continuously rated motor with thermal overload protection • Intermittent duty
SPECIFICATIONS:
• Connections: - for (3/8") 10mm or 13mm (1/2") bore hose • Pump Design: Multi-chamber diaphragm • Output: 4.2 litres/minute (0.9 gallons/minute) open flow • Pressure Switch: Cuts in at 1.5bar (22psi) - @ 2.4bar (35psi) • Motor: Permanent Magnet
• Amp Draw @10 psi (0.7 bar): 1.9 • Fuse Size: 4 amp • Weight: 1.3 lbs. • Size: 6.37" Long x 3.5" wide x 2.28" high ORDER NO. 42630-2992
SINGLE STACK WATER SYSTEM - 12V DC
The Single Stack Water System is a fully assembled water pressure set which makes installation of water pressure systems simple. The system consists of a PAR-Max 4.0 Pump, strainer and pre-pressurized accumulator tank.
Serves four or more outlets.
• Self-priming up to 10' (3m) • Run-dry ability • Smooth, even flow • Thermal overload protection • Complies with ISO 8846 MARINE (Ignition Protection) • Three-year warranty
PAR-MAXTM 1 PLUS LOW FLOW COMPACT WATER PRESSURE PUMP with FAUCET - 12 VOLT
• Includes faucet, 20' tubing, Quick Disconnect Ports (JohnGuest1/4"portfittings(pump), tankfitting(3/8"maleNPT)
• Flow Rate: Up to 1.0 GPM (3.8LPM) @ open flow • Sealed motor and pressure switch • Runs-dry without damage • Intermittent duty
• Self priming up to 6 ft. • Built-in thermal protector
SPECIFICATIONS:
• Pump Design: Reciprocating Diaphragm • Pressure Switch Setting: 35 psi (2.4bar) cutoff • Current for 12 VDC: 2.5 Amps @ psi (1.7 Bar) • Motor: Permanent Magnet • Amp: 2.5 Amps • CE, ISO 8846 • Size: 4"W x 3"H x 6.5"L ORDER NO. 42630-3992-P
DOUBLE STACK WATER SYSTEM - 12V DC
Double Stack Water System available in high flow for up to 7 outlets. Combines two pumps assembled onto a pre-pressurized accumulator tank to smooth flow and prevent pump cycling.
• Run-dry ability • Smooth, even flow • Two stage operation • Internal bladder accumulator tank • Thermal overload protection • Complies with ISO 8846 MARINE (Ignition Protection) • Three-year warranty
ORDER NO. 52530-1000
SPECIFICATIONS
Single Stack Water System
Flow
4.8 GPM (18 LPM)
Shut-Off Pressure
40 psi (2.8 bar)
Fitting
Connections for 3/4" (19 mm) hose tail
Size
12.2"L x 9.4"W x 9.8"H (24cm x 31cm x 25cm)
Weight
12 lb. (5.4 kg)
SPECIFICATIONS
Double Stack Water System
Flow
9 GPM (34 LPM)
Shut-Off Pressure
40 psi (2.8 bar)
Fitting
Connections for 3/4" (19 mm) hose tail
Size
13.6"L x 12.2"W x 13.6"H (34.5cm x 31cm x 34.5cm)
Weight
21 lb. (9.58 kg)
ORDER NO. 52520-1000
For more information see: www.xylem.com
924