Page 953 - 2020-2021 Catalogue

WATER PRESSURE PUMPS
5.0 GPM WATER PRESSURE PUMP
Powered by the revolutionary DiMOND technology
Jabsco’s V-FLO variable flow, constant pressure water pumps now feature the revolutionary new DiMOND technology designed to automatically diagnose and monitor all aspects of your pump’s performance to prevent system failure. DiMOND incorporates 10 specific modules designed to Monitor, Protect and Prevent – allowing you to evaluate and respond to the problem before the pump or your boat are damaged.
The DiMOND technology automatically runs diagnostics to detect common failures such as run dry, pump leaks, over current, under current, low voltage and over voltage. if the diagnostic discovers a problem, the pump will stop, identify the root cause, and provide the data you need to solve the problem.
V-FLO is powered by a new variable speed drive that delivers the exact amount of water flow needed to perform a variety of onboard delivery tasks. Since the pump is constantly monitoring water flow and electrical current, it automatically adjusts itself as needed, ensuring that your systems are operating at peak efficiency.
Features and Benefits
• 5.0 gallons per minutes (19 liters) • DiMOND technology provides consistent water pressure • Up to 50% less power consumption • Learns the boat’s water pressure system to improve pump performance • Kit includes 5.0 Water Pressure pump, PumpgardTM Inline Strainer, Snap-Fit Port Fittings
ORDER NO.
42755-0092
42755-0094
Mfr. No.
42755-0092
42755-0094
Nominal Max
DC Volts Fuse
12 VDC 15A
24 VDC 10A
Open Flow
GPM (LPM)
5.0 (19)
5.0 (19)
Operating
Pressure PSI (Bar)
40 (2.75)
40 (2.75)
Cut-Out
Pressure PSI (Bar)
60 (4.1)
60 (4.1)
PAR-MAX TM plus
NEXT GENERATION WATER PRESSURE PUMPS
Service up to five outlets with smooth flow and hassle-free operation
The high pressure capability of the new Jabsco Par-Max Plus Series water pressure pumps provides exceptional flow and consistent water pressure to easily handle the demand of multiple outlets. All Par Max Plus models include soft rubber mounts and quick connect fittings for ease of installation. The patented Par-Max-Plus co-injected molded diaphragm and larger heavier duty motor brushes significantly extend pump life up to 50% longer than existing Jabsco Par-Max Series diaphragm pumps.
The Par-Max Plus Series is self-priming up to 10 ft. (3m) and can run dry without damage. It’s manufactured from corrosion resistant materials, capable of handling the harshest marine environments.
Features and Benefits
• Sealed switch and co-injected molded diaphragm, eliminates leak paths, extending the life of the pumps by up to 50% • Jabsco’s robust electric diaphragm pump design, proven with over 7 million units in service • Up to 50% less power consumption • Automatic pressure switch, tested over 4 million cycles without failure
• Quick disconnect ports, allow for ease of installation in hard to reach places • Improved noise dampening rubber feet, significantly minimizes vibration when mounted against hard surfaces • Certified to EN ISO 8846 Marine (Ignition Protection) • Dimensions: 5.0 & 6.0 Models: 10.60" long x 5.09" wide x 4.72" high (27cm x 13cm x 12cm) 5.0 & 6.0 models • Dimensions: 4.0 Model: 9.91" long x 5.09" wide x 4.72" high (27cm x 13cm x 12cm) 5.0 & 6.0 models
ORDER NO.
82400-0092
82500-0092
82600-0092
Mfr. No.
82400-0092
82500-0092
82600-0092
Description Volts
GPM (LPM)
4.0 (15.1)
5.0 (18.9)
6.0 (22.7)
PSI (Bar)
60 psi (4.1 bar)
60 psi (4.1 bar)
60 psi (4.1 bar)
Fittings
(2) 1/2" (13mm) Hose Barb on 4 gpm
(2) 1/2" (19mm) Hose Barb on 5 gpm
(2) 3/4" (19mm) Hose Barb on 6 gpm
PAR-MAX PLUS 4
PAR-MAX PLUS 5
PAR-MAX PLUS 6
12 VDC
12 VDC
12 VDC
For more information see: www.xylem.com
927