Page 19 - KRC Catalog

Dry sump adapters
Shaft Drive Pump Adapters
KRC 19555300 SCP Dry-Sump Adapter
KRC 19550300 1st Design 1” Pump Spacer
KRC 19551000 1st Design Hilborn 3-Bolt Adapter
KRC 19552000 1st design 2-Bolt Sprintcar Adapter
The Stock Car Products (SCP) adapter is the first part required to mount a KRC shaft drive pump to the Stock Car Products (SCP) Dry-Sump oil pump. The SCP pump must have the main shaft drilled and tapped 3/8” x 24”. A drilled SCP Dry-Sump main shaft is available directly from SCP. A 7/8” O.D. 17-spline or 3/8” hex drive spud is required. To complete the installation you will need KRC 60550300 spacer to mount a new Pro
Series pump or a KRC 19550300 spacer to mount a 1st design aluminum pump.
A 1.0” thick 72mm bolt pattern spacer is required to use a 1st design KRC aluminum pump on the KRC 19555300 and KRC 19560300 Dry-Sump adapters.
This adapter uses a 3-bolt Hilborn pattern and will bolt directly to the rear of Peterson, Johnson, Wulff, Nutter, and Barnes pumps with a PTO and several other manufacturers that have a Power Take-Off built into the rear of the Dry-Sump pumps. This is also one of our most popular sprint car mid-plate adapters. This adapter does not work on the new R4
Peterson pump, they make their own mount for our pump.
This 2-bolt adapter is used to mount a 1st design aluminum power steering pump to a Sprint Car mid-plate. Includes hardware.
KRC 19555300
KRC 19550300
KRC 19551000
KRC 19552000
Dry-Sump Pump Accessories
KRC 19670000
Seal kit for KRC 1955300 and KRC 19560300 Dry-Sump pump adapters.
KRC 19582000
Dry-Sump adapter O-ring used for
KRC 19555300 & KRC 19560300 adapters.
Toll Free: 800.451.1074 | Tech Info: 770.422.5135 17