Page 35 - Ei Electronics Product Selector Guide

Action
None
Follow Fire Evacuation Procedure
Follow CO Evacuation Procedure
Follow Evacuation Procedure
Reconnect AC mains power
Replace the Alarm. Temporarily silence the Chirps by pressing the Test/Hush button. (Chirp silence last for 12 hours)
Replace the Alarm
Replace the Alarm. Temporarily silence the Chirps by pressing the Test/Hush button. (Chirp silence lasts for 12 hours)
Cause
Standby Condition
Fire Alarm Condition
CO Alarm Condition
Activated by another alarm in the interconnected system. Alarm with the Red LED or icon flashing is the detecting alarm
AC Mains off
Low back-up battery
Sensor Fault
End of Life
Observe & Hear
Sound
Full Fire alarm tone
Full CO alarm tone
Full Fire alarm tone
1 x short Chirp
2 x short Chirps
3 x short Chirps
Icon Display (Ei3028 Only)
Flashing
Flashing
Red LED
Flashing rapidly
Flashing rapidly
Amber LED
Flash x1
Every 48 Seconds
Flash x2
Every 48 Seconds
Flash x3
Every 48 Seconds
Green LED
ON
ON
ON
ON
Flash x1
Every 48 Seconds
ON
ON
ON
Alarm Indicator Guides
Ei3000 Series Alarm Indicator Guide
Refer to the Instruction Manual for a complete list of indicators
35
Alarm Indicator Guides