Page 2 - Hanson LOTOTO Catalogue 2023
P. 2

 INTRODUCTION
CONTENTS Introduction
WHAT IS LOCKOUT/TAGOUT/TRYOUT? 2 A Lockout is a method of keeping equipment from being set in
motion and endangering workers:
• A disconnect switch, circuit breaker, valve or other energy isolation mechanism is put in the safe or off position.
• A safety device is placed over the energy-isolating mechanism to hold it in the safe position. This is where Lockout/Tagout products are essential.
• A padlock is attached so that the equipment can not be energised.
In a Tagout, the energy-isolation device is placed in the safe position and a written warning is attached to it. All lockout and tagout materials are supplied by the employer. Each device must be:
• Durable to withstand wear.
• Substantial, so it will not come off easily.
• Capable of identifying the person who applied it.
Tryout - is where we test the controls to ensure zero energy and the equipment cannot be re-energised
• Always try the main controls
• Try mechanical valves to ensure zero energy
 Safety Padlocks - Brass and Aluminium 3-4
Lockout Hasps   5
Lockout Tags   6
 Pneumatic and Cable Lockout 7
Fuse Lockout   8
 Socket, Plug and Controls Lockout 9-10
 Circuit Breaker Lockout 11-13
Valve Lockout   14
Group Lockout   15-16
Lockout Stations   17-18
 Key and Padlock Cabinets 19
 LOTOTO -
LOCK-OUT, TAG-OUT & TRY-OUT
• Required when guarding or safety devices need to be removed or bypassed, or you are exposed to hazardous energy.
• Performed by authorised and responsible individuals.
• The nine steps of LOTOTO:
1. Prepare
2. Notify
3. Turnoff / Shutdown
4. Isolation
5. Apply Locks and Tags
6. No Stored Energy Present
7. Tryout
8. Perform Task
9. Inspect and Restore
          2
 INTRODUCTION


























































   1   2   3   4   5