Page 93 - Reece Safety Catalogue Issue 30

Scaffold Tag
The world’s leading scaffold status tagging system is a unique holder and insert system which ensures instant visibility of your scaffolding status and helps you efficiently manage your inspection procedures.
• A Scafftag® should be fitted at all legal access points (normally ladder access from first build to dismantle).
• Holders display a prohibition symbol and the wording
“DO NOT USE SCAFFOLD” during erection, awaiting inspection,
failure and dismantle stages.
• Scafftag® Kit contains: 10 Holders, 20 Standard Inserts and 1 Pen
– replacement inserts are sold separately.
• We recommend that you use the Wallchart and Pocket Guide
(semi-rigid PVC) to accompany your Scafftag® equipment. These will increase the employee knowledge and encourage the use of Scafftag® equipment in their routine.
Standard Inspection Insert
® SCAFFTAG KIT
• 10 x Holders / 20 x Standard Inserts • 1 x Pen
• Replacement Inserts sold separately.
Code
SCF01
Price
£73.41
SCAFFOLD TAG SCAFFTAG
Wallchart
Made from durable 0.7mm semi-rigid plastic.
Poster measures 600x420mm.
Code Price
Blue Book
Along with the blue book you will also receive 1 x Scafftag Holder, sample inserts and sample posters.
WC209 £22.99
Ref STSI (st)
Code Qty.
SCF03A 10 SCF03B 50
Price
£16.00 £79.45
Code Price
SCF28 £47.27
Code Qty.
SCF05 5
Price
£4.80
Holder
Pack of 10 holders comes with a pen
Pocket Guide
DO NOT USE SCAFFOLD
© Copyright Brady Corp Ltd Tel: +44(0)845 089 4050 www.scafftag.com
Ref. STH
Code
SCF33
Description
Blue Book
Price
£29.99
vbQOX??VNUNOV??PQYPT??o¢¤ƒ?P
5
4
12 79
9
10 6
11
13
14
13
13
8
Extracts from BS EN 12811-1:2003, NASC TG 20:05
Work at Height Regulations 2005, Construction (H.S.&W.) Regs 1996
All components must be undamaged and serviceable
Tubes: Must not be bent, split, or distorted or corroded. Boards: Must not be excessively split, warped or knotted. Fittings: Must be regularly serviced and maintained.
1. GEiXnCWEhEeeDls50 TKoGbSe. secured on load bearing couplers S.W.L. Clearly marked LOAD NOT TO 13. B-rLaceidnger (bBraScEinNg1s2h8o1u1ld-1b&e TfixGed20at: a0l5te)r-nLaetedgpeari,rsFoafçastdaend&aPrdlasni.n all lifts. Note - All working lifts must be 2th.estaGnduardsR.aAilsn(iWntAeHrmR)ediatMeignuimarudmrahilesighhatllobfe95p0omsitmionoendwtorlkiminigttphleatgfoarpmtso,4s7e0cumrmed.ontheinsideof u2nNimopaeddjaecdetnhtelrevfeolrseathteonledtgimere.bracingmustberemoved.Basicdesign(TG20:05)allowsforremovalof
3. Toeboards Min height to150mm fixed on all working platforms.
- FPalaçnadberabcrinagci,nagt,saemt atxbimeutwmeeonf 435lif°ts&a5n5d° atnidntsehrvaalllsbeofinttoetdmaot rleatshtaenv1e0ryb5aybsa.ys.
14. Baseplates Generally placed below standards, and 150mm x 150mm.
156. SAoclcepslsaHteieraUrcsheyi(nWpArHesRc) ribed circumstanc1e.sSatanidrcnaosessm, aller than 1,000cm2 beneath any one standard.
4. Bthoiacrkdninegss sThoobueldcnlost exbcoeaerdefdouarntdimensdthbeuitrtethdicthkrnoeusgshsohuot.uOldvneorht abnegleosfsththeabno5a0rdmsmofea.gn.ydetail on 38mm board min. 50mm - max. 150mm.
5. Transoms
6. Tarpaulins
7. Standards Duty
Maximum spacing 1.2m BS EN12811-1
To be fixed only to structures designed for their use. Centres dependent upon duty use.
2. Ladder Access Bays with single lift ladders
3. Ladder Access Bays with multiple lift ladders
4. Internal ladder access with a protected ladder trap 5. External ladder access using a safety gate.
Very Light Duty Light Duty General Purpose Heavy Duty
Class 1 Class 2 Class 3 Class 4 Class 5 Class 6
BS 12811-1 L oading 0.75 kN/m2 1.50 kN/m2 2.00 kN/m2 3.00 kN/m2 4.5 kN/m2 6.0 kN/m2
Standard Centres 2.7m 2.4m 2.1m 1.8m Designed Designed
Ladders
1 Supported on both stiles.
2 Extend 1.05m above landing point unless alternate handhold provided. 34 ISneccliunredlyatieadngaltehoefaadb&ouotn7a5°fiormr1&:l4evraetliobabsaes.etoheight.
5 Never paint wooden pole ladders (defects may be hidden).
8. LpeeddgesrtsrianCse.ntres not to exceed 2.00m, but base lift may be up to 2.7m max. for passage of
9. Ties
(BS EN 128811-1)
- Types of Ties, Box, Lip, Through, Reveal & Masonry Anchor - Class of Ties, Light Duty 3.5kN in tension
Standard 6.1kN in tension
Heavy Duty 12.2kN in tension
- Layout, on alternate standards on alterate levels max 4m apart. - Masonry anchor ties should have 5% tested for pull out.
10. LaedjgaecreJnotinbtasys oNr olifttsm.ore than 1/3 into a bay and be staggered throughout i.e. Not in
11. Standard Joints Must not occur at same height.
12. Standard/Ledgers Fixed with right angle couplers.
Ashsotwheinmga“nSaufeactotuUresre,”Sacna dtiasgwriethcoinmtmheeindspthecatioinnodpaetreast.iWoneirteisetrhveertehseporingshitbtiloityalotefrthweitshcoau topldrioursenrotoicenasnuyresptheecie qcautiipomnent of oisur ©prSocdau cttasg. SLCtdA.F2F0T0A6G Systems and Products are registered and copyright protected.
Images for illustration purposes only
Inspection RREFeWpSo01rRtesv 11/06
1
3
15
2
Independent Tied Scaffold
91