Page 34 - Foltz Trucking Driver Handbook

Bunk Heater Instructions
To turn the bunk heater on or off
• Press Menu/Snooze button 3 times
• Press On/Off Button
• Press Set
Once this is turned on driver can change the temperature dial and fan speed
Truck Main Power/Kill Switch
This is located on the right side driver's seat near the door frame. Please turn this off if you are going to be away from the truck. This will cut the power to everything. Door slides up and down and press the on or off button.
• Just remember to clean out your fridge when this is done.
Shore Power Connector and Engine Block Heater plug
These plugs are on the driver's side just under the cab. The outlet on the left (closest to the driver's door) is the Engine block heater and the right one under the cab is the Shore power. Each plug is labeled as well.
Block Heater
If the temperature is close to or below 0, Plug in the block heater the day or night before you want to leave. This will warm your coolant and help make starting your truck easier.
Shore Power
The truck is capable of running the outlets in the cab without running the truck. Plug an extension cord into a 120V outlet and this will run power to these outlets. This keeps a trickle charge on the batteries.