Page 15 - Envirotubes Dewatering Manual
P. 15
“InchwormIng”
if the envirotube® has to be moved after it is rolled out the easiest way is to “inchworm” it.
1. Start at the far end of the Envirotube®.
2. put one or two people on each side of the Envirotube® ten feet from the end.
3. Grab both sides and pull the Envirotube® overlap ten feet towards desired direction. continue this process by moving up every ten feet, pulling out the slack while repeating until you reach your desired position.
4. the Envirotube® can be straightened by the same method.
153
