Page 4 - AirFlo's Installation Guide R80207

SHOWNWITH MOUNTING BAR YOUR CASE MAY NOT HAVE ONE
PIN
SLIDE RACK
BACK END OF RACK RESTS ON BAR
ONE PIECE STEP RACK
PIN
ADivisionof SteinIndustries, Inc. 7135 Northland Drive North Brooklyn Center, MN 55428-1514 Phone (763) 504-3570
CREATEDBY: dflesher DRAWING/PART NUMBER:
REV: A
FIGURE 5.1
SLIDE RACK LENGTH
1/2 OF SLIDE RACK
SLIDE RACK
STEP 5
THE RACKS SHOULD HAVE AT A MINIMUM 1/2 OF THE SLIDE LENGTH ENGAGMENT INTO THE FRONT RACK.
SEE FIGURE 5.1 & 5.2
IF NOT YOU SHOULD CONTACT YOUR SALES REPRESENTATIVE TO DETERMINE IF YOU SHOULD USE YOUR CURRENT RACK DIFFERENTLY OR IF THERE IS A NEED TO ORDER A LONGERRACK.
FIGURE 6.1
PIN
ANOTHER TYPE OF RACK COULD BE AONEPIECERACK. THISTYPEOF RACK DOES NOT HAVE A SLIDE AND THE BACK END WILL REST ON A BAR. THEFRONTWILLSTILLHAVE PINS FOR CONNECTION TO THE FRONT OF THE CASE
SEE FIGURE 6.2
IF YOU HAVE ANY QUESTIONS PLEASE CALL YOUR SALES REPRESENTATIVE OR CUSTOMER SERVICE AT 1-800-999-9399
FIGURE 6.2
FRONT RACK
1/2 OF SLIDE RACK
TITLE: INSTALL GUIDE FOR PINNING AND INSTALLATION OF BASE RACKS
DMF: --- PCO1037 FILE: R80174.idw
PROPRIETARYDRAWINGOFCARLSONAIRFLOMERCHANDISINGSYSTEMS
CONFIDENTIALITY NOTICE: This document is confidential and privileged and is intended for the sole use of the addressee. If you receive this document in error, you are advised that any disclosure, copying, distribution or the taking of any action in duplicating this document is strictly prohibited and could result in legal action. This product may be covered under one, or more patents.
5/13/2013 SHEET DATE: 5/9/2013 3OF3
FIGURE 5.2 WITH SLIDE RACK
NOTE
THE PRECEDING STEPS ALSO WORK FOR STEP RACKS
SEE FIGURE 6.1
STEP RACK
R80174
REV. DATE: