Page 9 - JK Prototype Inc & Waterjet

Waterjet Cutting Services
Materials that are reflective, conductive, heat resisting, or heat sensitive are ideal candidates for abrasive water jet cutting. As the material thickness
increases, abrasive waterjet becomes the preferred cutting
technique, especially where accuracy must be
maintained. Heat sensitive and heat
resisting materials such as stainless
steel, alloy steel, titanium, inconel
and hastelloy can be cut with no
material effects. Some distortion may occur
due to the residual stresses already present in
the material. In thicker materials (over 1/4") the
edge finish and cut accuracy are superior to heat
cutting methods. There is no burr that may
require secondary operations. Conductive materials
such as aluminum and copper also cut well. Abrasive waterjet
cutting is the superior cutting method for aluminum because of its
high cutting speed. Since abrasive waterjet is a mechanical cutting process, materials of low hardness and density cut faster. Turn over for example applications
Waterjet Advantage
As opposed to flame, plasma and laser cutting, waterjet and abrasivejet cutting produce no heat affected zone to work harden the cut edges. Therefore you are able to cut various metals, plastics and other materials without melting, distorting or warping them.
Commonly Cut Items:
• Signs
• Logos
• Bus Bars
• Die Strippers • Shim Packs
• Fixture Plates
• Backing Plates • Weldments
• Gaskets
Features
•5’x10’Table
•Cutsupto6"
• Accuracy of Motion 0.005"
• Repeatability of Motion 0.001"
• 55,000 PSI Electric Servo Pump
• Closed Loop Water System
• Waste Garnet Recovery System
• Handles a wide variety of Materials
We cut parts at the minimum cost with the greatest accuracy!