Page 91 - Wales & West Products Catalogue

REQUIRE THEN GIVE US A CALL ON 01269 267030 --
PALACE WET- ROOM
A combined waterproof membrane system designed to protect tiled areas in locations such as wet- rooms, showers, bathrooms, and kitchen utility areas. PALACE WET-ROOM will inhibit the passage of moisture from within the tiled area, into substrates such as plaster, render, plasterboard, tile backer boards, timber, suspended floors concrete floors and plywood overlays.
PALACE BACKER BOARDS
Lightweight easy to apply Palace backer
boards are based on extruded polystyrene foam
coated with a water-repellent and easy to bond with special cement-based coating ready to receive all types of tile adhesive. They have excellent thermal insulation properties and are fully water resistant, making them ideal for use in showers & wet-rooms. The reinforced cementitious coating also provides a robust surface with high compressive strength and excellent impact resistance, whilst their lightweight properties make them easy to handle & install. Available in sizes from 6mm x 1200mm x 600mm
DURABASE CI++
PALACE GRIT- PRIME
A high-performance acrylic-based, fine textured bonding agent applied by brush or roller to give an improved key onto smooth impermeable surfaces such as existing ceramic, porcelain & stone tiles, resin-based & glazed coatings, dense power-floated concrete and hard securely bonded vinyl flooring. GRIT-PRIME is a solvent-free low odour blue-pigmented coating which dries within 1 hour and is then ready to receive cement- based tile adhesives and flooring screeds.
PALACE MASTER- GRIP
A brilliant white, fibre reinforced ready mixed
& super-smooth tile adhesive suitable for fixing
all types of ceramic wall tiles, including mosaics, porcelain, glass and vitrified tiles in internal locations where slight surface movement or vibration is likely. It has excellent initial grab & non-slip and unique polymer technology which gives it higher early strength development than conventional ready mixed tile adhesives and also improved flexural strength.
The DURABASE CI++ multifunctional matting system, with its 3-layer construction, offers much more than decoupling. With its crack-bridging properties and optimised shearing force protection, it allows new tiles to be laid on old and damaged tiled floors, provided that these are still load-bearing. For fresh screed, tiles can be laid immediately as soon as the screed can be walked on. Quick and straightforward to install and offering maximum installation reliability, DURABASE CI++ is ideal for renovation projects and for laying on mineral subsurfaces which are not quite dry.
Simple ordering by email sales@wwwbp.co.uk
91
ADHESIVES & SEALANTS