Page 402 - Colony Catalog 8th Edition 2

COLONY
PNEUMATIC & CORDLESS NAILING SYSTEMS AND AIR TOOLS
Hitachi Coil Siding Nailer
The Hitachi NV65AH2 2-1/2" coil siding nailer brings power, precision and convenience to the jobsite and weighs only 4.8 lbs. Capable of driving nails as large as 2-1/2" x .099" at a rate of 3 per second, the NV65AH2 is both powerful and ef cient. With newly added features
like a selective actuation switch, side load, tilt bottom magazine and repositioned depth of drive adjustment dial, the professional preferred siding nailer gets even better. Additional features such as the adjustable air de ector, no mar nose cap and plastic shield add convenience
and the ability to use both wire or plastic sheet nails creates exibility.
Includes safety glasses and hex bar wrenches (3).
Hitachi Angled Finish Nailer
The NT65MA4 15-Gauge Angled Finish Nailer is used for nish-nailing of door casings, window casings, and similar frame assemblies, and for fastening of drawer bottoms and similar assembly work in the construction of various cabinets and cases. Its compact body and angled magazine make for easier placement and operation in tight angles. The integrated air duster clears dust and dirt from the work site allowing for faster, accurate job completion. 4.4 lbs., lightweight and well balanced for easy maneuverability. Selective actuation
(ANSI Compliant), allows transition from single actuation to contact actuation. Tool-less clogged nail release mechanism for greater ease of use. Depth of drive adjustment, to countersink or ush drive nails. Unique air duster, clears debris before material installation. Adjustable air de ector, directs the air exhaust in any direction. Long-lasting rubber grip, for added comfort. Includes: Safety Glasses, Hex Bar Wrenches (2), and Heavy-Duty Plastic Carrying Case.
Speci cations
Fastener Type
Coil, Wire/Plastic Sheet Collation
Magazine Angle
16°
Fastener Length Capacity
1 1/2" to 2 1/2"
Fastener Diameter Range
.090 to .099
Magazine Capacity
200-300
Magazine Loading
Side
Air Inlet
3/8"
Operating Pressure
70-120 psi
Actuation
Contact
Depth Setting
Tool-Less
Air Consumption
.049 (FT3/Cycle @100 psi)
Dimensions
10 1/2" (L) x 5 1/16" (W) x 11 13/16" (H)
Weight
4.8 lbs.
Speci cations
Fastener Type
15-Gauge Finish
Magazine Angle
34°
Fastener Length Capacity
1 1/4" to 2 1/2"
Fastener Diameter Range
15-Gauge
Magazine Capacity
100 Nails
Magazine Loading
Rear
Air Inlet
3/8"
Operating Pressure
70-120 psi
Exhaust De ector
360° Adjustable
Jam Clearing
Tool-Less
Depth Setting
Tool-Less
Actuation
Selective (Sequential/Contact Fire)
Dimensions
13 9/16" (L) x 3 1/4"(W) x 12"(H)
Air Consumption
.042(FT3/Cycle@100psi)
Weight
4.2 lbs.
Item
Description
89-2185
NV65AH2 Siding Nailer
Nails for Hitachi NV65AH2 Siding Nailer
Heat treated hot dipped galvanized paper tape strap tite nails.
Description
Size
Item
Qty. Per Box
Plastic Sheet Stainless Steel (304) Coil Nails
2 1/4" x .092 Ring Shank
89-2208
2,400
Plastic Sheet Stainless Steel (304) Coil Nails
2 1/4" x .092 Ring Shank
89-2186
4,800
Stainless Steel (304) Wire Coil Nails
1 3/4" x .090 Ring Shank
89-2209
900
Stainless Steel (304) Wire Coil Nails
1 3/4" x .090 Ring Shank
89-2189
3,600
Stainless Steel (304) Wire Coil Nails
2 1/4" x .090 Ring Shank
89-2210
900
Stainless Steel (304) Wire Coil Nails
2 1/4" x .090 Ring Shank
89-2190
3,600
Hot-Dipped Galvanized (HDG) Coil Nails
1 3/4" x .092 Ring Shank
89-2187
3,600
Hot-Dipped Galvanized (HDG) Coil Nails
2 1/4" x .092 Ring Shank
89-2188
3,600
Item
Description
89-2197
NT65MA4 Finish Nailer
Nails for Hitachi NT65MA4 Finish Nailer
15 Gauge angled nish nails.
Item
Description
Qty. Per Box
89-2211
2" Finish Nails
4,000
89-2198
2" Finish Nails
16,000
89-2212
2 1/2" Finish Nails
3,000
89-2199
2 1/2" Finish Nails
12,000
89-2213
2" Finish Nails Stainless Steel (304 SS)
4,000
89-2200
2" Finish Nails Stainless Steel (304 SS)
16,000
89-2214
2 1/2" Finish Nails Stainless Steel (304 SS)
3,000
89-2201
2 1/2" Finish Nails Stainless Steel (304 SS)
12,000
402
TO ORDER CALL 800-698-0781 OR VISIT COLONYHARDWARE.COM