Page 448 - Colony Catalog 8th Edition 2

Item
Shank Length
95-0136
1/2" (knurled)
95-0138
5/8" (knurled)
95-0140
3/4"
95-0144
1"
Spike®
Base Material: Concrete
Size Range: 3/16" x 1" to 1/4" x 14"
Anchor Material: Perma-SealTM Coated Carbon Steel
For roo ng applications, the SPIKE is a one-piece, vibration resistant anchor available in 1/4" diameter, for use in fastening insulation, single-ply membrane, wood, and metal to structural concrete
roof decks. This version of the SPIKE has a Perma-Seal coating
a proprietary uoropolymer which meets the corrosion resistance requirements of FMRC Standard 4470. It is designed for use in conjunction with Powers insulation or membrane stress plates.
Perma-SealTM Spike®
.300 Head Drive Pins with Top Hat
The pins listed are used primarily for applications fastening drywall
track to concrete or steel. They are assembled with a metal top hat to provide extra bearing surface against the drywall track. Head Diameter: .300". Shank Diameter: .145". Sold 100 per box.
DX 40, DX 41, PA351TM DX 460 Pins
This 10 fastener magazine style pin will t Hilti® DX 40 & Hilti® DX 41 tools, as well as Powers PA351TM. Please note: Powers PA351TM accepts up
to 1 5/8" size fasteners only. Head Diameter: 8mm. Shank Diameter: .145". Sold 500 per box.
8mm Head Drive Pins (X-DN Type) Pins
Drive pins with an 8mm diameter head are
designed for permanently fastening a xture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.143" diameter shank in various
8mm Diameter Head Drive Pins with Top Hat
The pins listed below are used primarily for applications
fastening drywall track to concrete or steel. They are assembled with a metal top hat to provide extra bearing surface against the drywall track. Head Diameter: 8mm. Shank Diameter: .145". Sold 100 per box.
FASTENERS & FASTENING SYSTEMS
COLONY
Item
Shank Length
95-0244
3/4"
95-0246
7/8"
95-0248
1"
95-0250
1 1/4"
95-0252
1 1/2"
95-0254
1 5/8"
95-0256
1 7/8"
95-0258
2"
95-0260
2 1/4"
95-0262
2 1/2"
95-0264
2 7/8"
Item
Anchor Size
Drill
Min. Embed
Std. Box
99-3725
1/4" x 2"
1/4"
1 1/4"
500
99-3727
1/4" x 2 1/2"
1/4"
1 1/4"
500
99-3729
1/4" x 3"
1/4"
1 1/4"
500
99-3731
1/4" x 3 1/2"
1/4"
1 1/4"
500
99-3733
1/4" x 4"
1/4"
1 1/4"
500
99-3735
1/4" x 4 1/2"
1/4"
1 1/4"
500
99-3737
1/4" x 5"
1/4"
1 1/4"
500
99-3739
1/4" x 5 1/2"
1/4"
1 1/4"
500
99-3741
1/4" x 6"
1/4"
1 1/4"
250
99-3743
1/4" x 6 1/2"
1/4"
1 1/4"
250
99-3745
1/4" x 7"
1/4"
1 1/4"
250
99-3747
1/4" x 7 1/2"
1/4"
1 1/4"
250
99-3749
1/4" x 8"
1/4"
1 1/4"
250
99-3753
1/4" x 9"
1/4"
1 1/4"
250
Item
Shank Length
15-0430
5/8" (knurled)
15-0431
7/8"
15-0432
1"
15-0433
1 1/4"
15-0434
1 5/8"
15-0435
1 7/8"
15-0436
2"
15-0437
2 1/4"
15-0438
2 1/2"
15-0439
2 7/8"
Powder Actuated Fasteners
.300 Head Drive Pins
Drive pins with a .300 diameter head are designed for permanently fastening a xture to concrete, some types of masonry and A36
structural steel. Drive pins are manufactured with a .145" diameter shank in various lengths. Knurled shank designs are available to increase performance in steel base materials. A plastic ute is mounted over the point to retain the drive pin in the fastener guide of the tool providing guidance during the driving operation. Sold 100 per box.
Item
Shank Length
Std. Box
95-0012
1/2" (knurled)
100
15-0411
5/8" (knurled)
100
15-0412
3/4"
100
15-0413
1"
100
15-0414
1 1/4"
100
15-0415
1 1/2"
100
15-0416
2"
100
95-0040
2 1/4"
100
15-0417
2 1/2"
100
15-0418
3"
100
Item
Shank Length
95-0210
5/8" (knurled)
95-0214
7/8"
95-0216
1"
TO ORDER CALL 800-698-0781 OR VISIT COLONYHARDWARE.COM
449