Page 486 - Colony Catalog 8th Edition 2
P. 486

COLONY
DIAMOND & ABRASIVE PRODUCTS
Mongoose Drill Stand
Drilling safety standards require the use of a drill stand on any holes over 3” diameter. Features magnesium column, replaceable steel rack, and replaceable polymer carriage guide.
Dry Diamond Vacuum Bits
Designed to be run on a 7” or 9” 5,000 RPM grinder or a standard core drill. Must be used with the Air Vacuum Swivel Assembly and connected to a good quality, two-stage vacuum. This bit will drill through brick, block and cured concrete while eliminating dust. Please note: Do not use in applications with steel (i.e. rebar) heavier than wire mesh. Thread size: 1 1/4”-12. Drilling depth: 9”. For best results, use with a contractor grade vacuum such as a Fein Turbo II or Bosch Auto- Clean vac.
Speci cations
Weight Mounting type Column Length Column Size
Item
71-8004
Replacement Parts for Mongoose Bits
19 lbs. Bolt base 30”
2’ x 2”
Description
Mongoose Drill Stand
Item
Diameter
Drill/Grinder Min. Amps
Min. Max. RPM RPM
90-2027 1 1/2” 6 1,600 5,000 90-2029 1 3/4” 6 1,600 5,000
90-2031 90-2033 90-2035
2” 6 2 1/4” 7 2 1/2” 7
1,200 5,000 1,200 5,000 1,200 5,000
90-2037 3” 7 800 5,000 90-2039 3 1/2” 10 800 5,000
90-2041 4” 10 700 5,000 90-2043 5” 10 700 3,500
90-2045 6” 10 600 2,500
Item
19-1244
Description
12” Mongoose Bit Extension
Dry Cut Diamond Core Bits
Item
Diameter
Min. RPM
Max. RPM
Dry diamond bit for coring holes in block, brick, terra cotta and soft masonry up to 5” diameter using an angle grinder. Cores a clean, neat hole
in less than one minute with no spawling. 5/8”-11 standard thread with 9” drilling depth. Not designed for use on solid concrete. Designed to be used on a 7” or 9” 5,000 RPM angle grinder.
Air Vacuum Swivel Assembly
Designed for use with Dry Vacuum Core Bits. 5/8”- 11 female, 1 1/4”-7 male thread. Fits onto most 7” or 9” grinders and core motors. Sold separately.
Item 90-2047
Vacuum Bit Extension
12” long swivel extension designed speci cally to be used with Dry Diamond Vacuum Bits.
Item 90-2049
Power Tool Min. Amps
Power Tool
Diamond Router Bits & Tuck Point Grinding Pins
Diamond Plated Routers
Features a tough, durable bond with a single layer of diamond adhesive. Ideal for routing highly abrasive materials. We recommend using a Metabo GE710PLUS Die Grinder with these bits (see Item 10-1231).
Head Length of Shank Overall Item Diameter Diamond Diameter Length
Vertical Tuck Point Grinding Pins
Also available with 5/16” shank. We recommend using a Metabo GE710Plus Die Grinder with these bits (Item 10-1231).
Item Size Shank Diameter
29-1120 29-1121 29-1122
7/8” 6 1” 6 1 1/4” 6
2,300 6,000 2,300 6,000 2,300 6,000
29-1123 1 1/2” 7 1,600 5,000
29-1124 1 3/4” 7 1,600 5,000
29-1125 29-1126 29-1127
2” 7 2 1/4” 7 2 1/2” 7
1,200 5,000 1,200 5,000 1,200 5,000
29-1128 3” 7 800 5,000 29-1129 3 1/2” 10 800 5,000
29-1130 29-1132 29-1131
4” 10 700 4 1/2” 10 700 5” 10 700
5,000 5,000 3,500
10-4090 1/8” 1” 1/4” 2 1/2” 10-4092 1/4” 1” 1/4” 2 1/2”
90-3017 1/4” 1/4”
90-3018 3/8” 1/4”
90-3019 1/2” 1/4”
488
TO ORDER CALL 800-698-0781 OR VISIT COLONYHARDWARE.COM





























   484   485   486   487   488