Page 520 - Colony Catalog 8th Edition 2

Push Install Rod/Wire Hanger
Qty: 100 per box.
Item Description
21-0815 1/4” Rod, #8 Wire
Lathers Channel to Rod/Wire/Side Mount
Provides pre-leveling of channel. No tools re- quired for installation. Use with plain rod or wire. Qty: 100 per box.
Item Description
Push Install Rod/Wire Hanger
Qty: 100 per box.
Item Description
21-0812 Lather Clip Channel Hanger
Metal Stud Fastening Applications
Saf-Te-Plate
Protects cable and plastic pipe from nail punctures. Single hammer blow attaches the plate to wood studs. Required for compliance with NEC 1990 Article 300-4A.
Item Description
Caddy Box Mounting Bracket
Easily attaches 4” and 4 11/16” outlet boxes
to metal or wood stud. Support leg prevents box movement and provides far side support. Offset design eliminates unsightly drywall bulge. Alignment notch simpli es consistent box positioning.
STRUT & HANGERS
Provides a fast, easy way to install low voltage
Class 2 communication outlets during rough-in
construction without having to use an electrical box.
Makes sh wiring easier. A bendable ap provides a
termination plate for conduit. Automatically positions
for 1/2” or 5/8” drywall. May be installed to the
front or the side of a metal or wood stud. Eliminates
bulges in the drywall caused by plaster rings. Fastens with dry wall or self tapping screws.
21-0811 1-1/2” Channel, 1/4” Rod 21-0813 1-1/2” Channel, #8 Wire
Item Model
Description
Qty. per box
COLONY
Item Model
Description
Qty. per box
21-0750 H23 4” sq. and 4 11/16” outlet boxes 100 to 2 1/2” and 3 1/2” metal studs
21-0752 H4 4” sq. and 4 11/16” outlet boxes 50 to 4” metal studs
Low Voltage Mounting Bracket
21-0738 MP1S Single gang plate mounting 25 bracket for new work
Caddy Conduit Clamps With Bolts
Fast and easy installation- installs with screw- driver or nut driver. Has mounting hole for 1/4” bolt. Retained bolt and nut means there are less parts to handle or drop. Bright zinc nish. Other sizes available. Call for a complete listing.
Item Model
Rigid EMT
Qty. per box
12-0182 11/2” x 3” x 16 gauge Metal Plate
12-0183 11/2” x 6” x 16 gauge Metal Plate
21-0727 CD0B 1/2”
21-0728 CD1B 3/4”
21-0729 CD2B 1”
1/2” 100 3/4” 100 1” 100
Caddy “Colorado Jim” Cable Support
A fast, economical way to comply with
NEC 1990 Article 300-4d when used
with metal and wood stud. Can be used
to support up to 6 runs of nonmetallic
sheathed cable, or up to 4 runs of nonmetallic sheathed cable. Fastens to metal stud with self drilling or tapping screws.
Item Model Description Qty. per box 21-0746 CJ6 To Wood & Metal Stud 100
TO ORDER CALL 800-698-0781 OR VISIT COLONYHARDWARE.COM
523