Page 13 - 2017 Halogen Catalog Catalog

RAMUC ENAMEL TYPE “EP” EPOXY
Ramuc’s finest epoxy swimming pool coating is a high solid, high gloss paint formulated to provide a tile-like, abrasion resistant surface. Ideal to use for the protection of concrete, plaster or fiberglass in swimming pools, spa’s, reflecting pools, water parks and wave pools. Coverage is approximately 400 sq. ft. per gallon and no primer is required. #1540-DB-1 Dawn Blue #1540-MW-1 White
#1540-HBW Hi-Build White 2 gal. kit . . . . #1540-HBDB Hi-Build Dawn Blue 2 gal. kit . .
Premium Rubber Based Pool Paint
$255.30 $255.30
BLACK
DARK BLUE
RAMUC TYPE DS WATER-BASED ACRYLIC
Type DS is formulated to provide a decorative but tough, durable film that protects concrete and plaster pools. Type DS can be applied over previously painted chlorinated and synthetic rubber base paint, as well as properly prepared epoxy painted surfaces. Type DS is ideal where down time is critical, can be applied over damp surface and put into ser- vice 3 days after final coat.
#1539 Ramuc Thinner 1 gallon . . . . . . . .
INTRODUCING NEW TYPE A-2
$28.30
WHITE
DAWN BLUE
AQUA GREEN
#1540-AG-1 Aqua Green #1540-B-1 Black 1 gal. kit . . . . . . . . . . . . . . . . . #1540-DKB-1 Dark Blue 1 gal. kit . . . . .
RAMUC EPOXY HI-BUILD
$114.70 $133.20
#9101-W-1 Type DS White 1 gallon . . . . . . #9101-DB-1 Type DS Dawn Blue 1 gallon . . . #9101-B-1 Type DS Black 1 gallon . . . . . .
UNIVERSAL THINNER
$90.70 $90.70 $90.70
Ramuc Epoxy Hi-Build is a premium satin finish self-priming epoxy that’s an excellent choice to renovate plaster or concrete pools or spas. Long-lasting and durable it upgrades faded or scratched fiberglass. Coverage is 75-125 sq. ft. per gallon on sandblasted
or rough surfaces and 125-150 sq. ft. per gallon on recoats.
Ramuc Universal thinner can be used for either epoxy or rubber base paints.
PREMIUM RUBBER BASED POOL PAINT
• Versatile-topcoats and upgrades existing chlorinated and synthetic rubber systems.
• VOC Compliant-meets the strictest state and federal environmental regulation of 320 gpl VOC.
• Easy to clean, semi-gloss stain-resistant finish. • Excellent hiding and coverage; spreads at
400+ sq ft/gallon on recoats.
#1544-DB-1 Dawn Blue #1544-W-1 White
#1544-B-1 Black 1 gal. can . . . . $101.80
® RAMUC POOL PAINTS
For more than 70 years Ramuc Pool and Deck Paint has been dedicated to formulating the finest swimming pool and deck coatings for the backyard pool to the water park wave pool and everything in-between. Protect your investment and recapture the original beauty of your pool or commercial water attraction with proven protective coating systems manufactured by Ramuc.
RAMUC ACRYLIC DECK COAT
Ramuc Acrylic Deck Coat is a water-based acrylic deck coating formulated to provide a tough, durable film of protection cover previously painted, unpainted or textured concrete pool decks and patios. Standard acrylic deck coat can become non-skid by adding Skid-Tex non-skid additive. Standard coverage 300-350 sq. ft. per gallon at 4 mil wet, 1.6 mil dry.
#25101 Standard acrylic deck coat 1 gal. can $72.20 #92242 Skid-Tex non-skid additive 1 lb. container $7.90
F.O.B. Medina OH.
WHISPER SILVER CAYMAN DUNE
(Please specify color code when ordering)
WW Whisper White, CS Cayman Sand, DS Dune Shadow, SC Silver Creek.
WHITE CREEK SAND CLEAN AND PREP SOLUTION
DESCRIPTION AND USE: Clean & Prep Solution is used to clean and degrease while simultaneously dissolving mineral deposits, increasing porosity for good adhesion on surfaces prior to painting. LIMITATIONS: Do not apply to concrete
that has already been sealed or stained. SURFACE PREPARATION: After all surface repairs, power wash loose material off to a tight surface. FOR BARE CONCRETE, GUNITE, MARCITE OR PLASTER: Mix 1 gallon Clean & Prep Solution with 2 gallons of water. Cleans approximately 400 square feet.
FOR PAINTED SURFACES OR BARE FIBERGLASS: Mix 1 gallon Clean & Prep Solution with 5 gallons of water. Cleans approximately 600- 800 square feet. Use a garden sprayer for even application of product. Be sure the heavily soiled areas (such as the waterline, steps or regular foot- paths on concrete decks) are scrubbed well.Triple- rinse the surface with a strong stream of clean water while scrubbing to ensure complete removal of all material.
FOR POOL FILTER ELEMENTS: Mix 1 gallon Clean & Prep Solution to 5 gallons of hot water; soak for at least 1 hour, rinse and repeat if necessary to completely remove scum and mineral deposits.
#9306 CLEAN AND PREP SOLUTION 1 gallon . . . . . . . . . . $33.30
SHADOW
• VOC Compliant
• Perfect for painted surfaces • Turns traditional 3-steps into
a 1-step process
• Water-rinse neutralize
• Odor-free; No Fumes
• Biodegradable, safe to use
near plants & grass
• Excellent for filter element cleaning
www.ramucpoolpaint.com
11