Page 36 - Australasian Paint & Panel May-June 2021

Measuring & Alignment
36
PAINT&PANEL MAY / JUNE 2021
CELETTE GRIFFON
CELETTE NAJA 3D -
FEATURES:
• Sevenne Pulling Unit with 10 Tonne Ram
• Ramp lift to 1.32 metres height
• Plus inner lift, enabling 2.5 metres
height
• 2,800kg lift capacity
• Griffon XL available with an extended
length of 5.80 metres
More information: sape.com.au
GRIFFON IS A DRIVE-ON BENCH WITH A
2800 kg lifting system using a running decking plate. Dismantling the anchor- ing clamps and cross-members is not required while positioning the vehicle. The inner lifting system is operated by means of a remote control device.
Only a part of the runway decking plate (light but solid and made of com- posite material) needs to be removed if the repairing process requires it.
MEASURING & DIAGNOSTIC KIT
CELETTE’S NAJA EVOLUTION 3D SOFT- FEATURES:
ware directly takes measurements from OEM-provided 3-D CAD drawings and provides technicians with unique views of the control points in relation to length, width and height, allowing for an efficient damage analysis on a data- base of more than 14,000.
• New 3D system supports visualisation of actual points in space.
• Produce rapid diagnostic reports in less than 10 minutes.
• System can be used on or off the bench. • Online update facility.
• Bluetooth radio communications.
• Celette Naja Diagnostics Hardware
combination
• Instantaneous measurement while
placing the sensor against the meas-
uring point.
• On site Installation & Training
• Approved by major motor manufac-
turers
• Optional anchoring arms available
More information: Sape.com.au