Page 45 - Climate Control News magazine February 2023
P. 45

                 Refrigerants
  New method of refrigeration to replace refrigerants
RESEARCHERS AT THE US Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab) have developed a new method of refrigeration dubbed ionocaloric cooling which could replace refrigerants.
Ionocaloric cooling takes advantage of how energy, or heat, is stored or released when a material changes phase – such as changing from solid ice to liquid water. Melting a material absorbs heat from the surroundings, while solidifying it releases heat.
The ionocaloric cycle causes this phase and temperature change through the flow of ions (electrically charged atoms or molecules) which come from a salt.
“RESEARCHERS WANT TO PHASE OUT VAPOUR COMPRESSION SYSTEMS.”
Researchers hope that this method could one day provide efficient heating and cooling, which accounts for more than half of the energy used in homes, and help phase out current “vapour compression” systems, which use gases with high GWP as refrigerants.
Ionocaloric refrigeration would eliminate the risk of such gases escaping into the atmosphere by replacing them with solid and liquid compo- nents, according to Drew Lilley, a graduate research assistant at Berkeley Lab and PhD candidate at UC Berkeley who led the study.
“The landscape of refrigerants is an unsolved problem: No one has successfully developed an alternative solution that makes stuff cold, works efficiently, is safe, and doesn’t hurt the environ- ment,” he said. “We think the ionocaloric cycle has the potential to meet all those goals if real- ised appropriately.”
Finding a solution that replaces current refrigerants is essential for countries to meet climate change goals, such as those in the Kigali Amendment which commits signatories to reduce production and consumption of hydro- fluorocarbons (HFCs) by at least 80 per cent over the next 25 years.
The new ionocaloric cycle joins several other kinds of “caloric” cooling in development. Those techniques use different methods
– including magnetism, pressure, stretching, and electric fields – to manipulate solid mate- rials so that they absorb or release heat. Ionocaloric cooling differs by using ions to drive solid-to-liquid phase changes. Using a liquid has the added benefit of making the material pumpable, making it easier to get heat in or out of the system.
Lilley and corresponding author Ravi Prasher, a research affiliate in Berkeley Lab’s Energy Technologies Area and adjunct profes- sor in mechanical engineering at UC Berkeley, laid out the theory underlying the ionocaloric cycle. They calculated that it has the potential to compete with or even exceed the efficiency of gaseous refrigerants found in the majority of systems today.
They also demonstrated the technique experi- mentally. Lilley used a salt made with iodine and sodium, alongside ethylene carbonate, a com- mon organic solvent used in lithium-ion batteries.
“There’s potential to have refrigerants that are not just GWP [global warming potential]- zero, but GWP-negative,” Lilley said. “Using a material like ethylene carbonate could actually be carbon-negative, because you produce it by
using carbon dioxide as an input. This could give us a place to use CO2 from carbon capture.”
Running current through the system moves the ions, changing the material’s melting point. When it melts, the material absorbs heat from the surroundings, and when the ions are removed and the material solidifies, it gives heat back. The first experiment showed a temperature change of 25 degrees Celsius using less than one volt, a greater temperature lift than demonstrated by other caloric technologies.
“There are three things we’re trying to bal- ance: the GWP of the refrigerant, energy effi- ciency, and the cost of the equipment itself,” Prasher said. “From the first try, our data looks very promising on all three of these aspects.”
While caloric methods are often discussed in terms of their cooling power, the cycles can also be harnessed for applications such as water heating or industrial heating. The ionocaloric team is continuing work on prototypes to deter- mine how the technique might scale to support large amounts of cooling, improve the amount of temperature change the system can support, and improve the efficiency.
       Lawrence Berkeley National Laboratory.
CLIMATE CONTROL NEWS FEBRUARY 2023
 45
 












































































   43   44   45   46   47