Page 45 - HW FEB 2021

constructed in accordance with NZS3604:2011; Premium Joining
Tape is a very high adhesive tape, that is suitable for use on rigid
board applications and is the recommended joining tape for the
James Hardie RAB Board system. It is also suitable for use with
Thermathene Orange / Black; Stud Strap is a black polythene
woven and coated strap, for use as a support for non-self support
Roof Underlays, and to restrict insulation bellowing of wall
underlays in drained cavity applications. Ideal for large wall
applications; Supercourse 500 a Damp Proof Course (DPC) and
concealed flashing is a hi-impact polyethylene film, embossed on
both sides. Is a suitable moisture impermeable alternative to
bituminous DPC, will provide moisture barrier protection and
prevent walls, floors and structural elements in contact with the
ground absorbing or transmitting moisture. It is intended for use as
a DPC separating timber and wood-based products from concrete
or masonry elements or where required, timber jack studs, bearers
and piles; Thermabar 344 is a fire retardant light diffuser foil
Insulation, consisting of a layer of highly burnished aluminium foil
bonded with a fire retardant adhesive to a white woven polymeric
mesh. It will provide a white finish, increasing light diffusion and
reflection. Can be used as a vapour control layer, and improve
thermal performance if installed and taped on the warm side of
bulk insulation; Thermabar 397 is a fire retardant, light diffuser,
high strength foil insulation & vapour control layer used to line
walls and under roofs in commercial and industrial building where
the look and finish needs to be high quality. Provides extreme tear
resistance & low shrinkage with high tensile strength. Ideal product
to use as provides a high quality white aesthetic finish, increasing
light diffusion and reflection when installed with white surface
facing down; Thermaflash is a high performance self-adhered
flashing tape. Suitable for window and door installation and other
wall penetrations, no mess, compatible with most sealants, installs
in a wide range of temperatures. Seals joins and bonds to virtually
all building surfaces and wall underlays including rigid wall
underlay systems, treated plywood and fibre cement systems. Can
be exposed to the elements for up to 180 days; Thermakraft One
Wrap System is a 10-product integrated BRANZ appraised
solution designed to assist with the control of air and moisture
within a building,to help keep it dry,safe and healthy.The
Thermakraft One Wrap System consists of Watergate Plus 295,
Thermakraft 220 and Covertek 403 Plus wall underlays; Aluband
and Aluband Xtreme flexible flashing tapes, Thermastrap and Stud
Strap 201, Thermakraft ONE SEAL, Corner Moulds and white general
purpose tape; Thermakraft 213 Bituminous Heavy Weight
Building Paper is a versatile building underlay, designed for use in
residential and commercial wall and roof applications. Highly water
vapour permeable, allowing excess water vapour that may
otherwise condense in the wall structure to escape. Bituminous
building papers are called out as the acceptable solution for
building underlays in NZBC E2/AS1 Table 23, and NZS 2295; 2006 for
both wall and roof application.Wall application Is suitable for use in
all wind zones of NZS 3604 up to, and including,“Very High”, when
used as a standalone flexible underlay, and extra high when used
as a flexible underlay over a rigid wall underlay. Roof application
requires support at all pitches; Thermakraft 215 self-supporting
roof and wall underlay is an absorbent, breathable underlay
specifically designed for use in Domestic and Commercial buildings.
Suitable as a roof and wall underlay with all cladding types, where
Fire Retardancy is NOT required. As a roof underlay Self-supporting
when run horizontally at pitches 3° and greater.When run vertically
at pitches >3° and <10° degrees, 215 must be supported. Support
recommended at very low pitches. Situated in NZS3604 Building
WindZonesupto,andincluding‘VeryHigh’(wall);Thermakraft215
complies with the requirements of NZBC E2/AS1 Table 23;
Thermakraft 220 is a fire retardant, absorbent, breathable wall
underlay. It is a white non-woven polypropylene, for use on timber
framing behind exterior wall cladding.Thermakraft 220 offers a
high degree of water vapour permeability. Used as a wall underlay
on timber framed buildings with absorbent and non-absorbent
P.V.C wall cladding direct fixed to framing also on timber buildings
with absorbent and non-absorbent wall cladding installed over an
18mm minimum drained cavity; Thermakraft OneSeal They are
a patented, highly adhesive for complete air and water tight
solution for round or rectangular pipes, cables or conduits when
passing through underlay barriers.Thermakraft One Seal are simple
to install, highly adhesive and completely airtight, no need for
special tools, glue or tapes. Remove the guesswork and be sure that
you’ll always have the right size for the job. Four pre-notched rings
forpipessizedfrom15mmto110mmdiameter.1xconduit– maximumimpact,andmeetandexceedsalestargets metalaccessories
55mm to 80mm diameter or 2 x cables – 10mm to 22mm diameter; and 4 x cables – 7mm to 10mm diameter. Part of the Thermakraft One Wrap System; Thermastrap is a blue polythene embossed strap, for use as a support for non-self support roof underlays, and to restrict insulation bellowing of wall underlays in drained cavity applications high tensile strength; Thermathene Black is used as a concrete underlay and a moisture vapour barrier in areas where protection is required.Thermathene Black is 250 micron, and coloured black for ultra violet resistance. Complies with NZS 3604.2011 as a concrete underlay & DPM; Thermathene Orange is a super hi-strength concrete underlay. It is a tear resistant Polyethylene film that has been extruded using special resins to promote tough properties within the membrane. Used as a Concrete Underlay and moisture barrier in applications where high puncture and tear resistance is required; Vapourshield moisture control barrier consists of a woven polyethylene coated both sides with polyethylene film, is tear resistant and can withstand climate extremes. It is moisture proof and impervious to rot, mildew and most chemicals. Laid as a moisture vapour barrier initially to maintain a waterproof membrane to keep the sarking dry until the roof is fixed, then acts as a vapour control layer during its serviceable life; Watergate Plus is a fire retardant, absorbant and breathable wall underlay. It is a white composite non-woven polypropylene, specifically designed as a wall underlay behind exterior wall cladding. Watergate Plus 295 also offers a high degree of water resistance, with a high level of water vapour permeability. Maximum UV exposure 60 days; White General Purpose Tape a premium white polypropylene tape, using the latest in acrylic adhesive technology which can be used on synthetic wall & roof underlays, foil products or damp proof membranes such as thermathene.The tape is also ideal for sealing edges of vapour control layers, ducts and underfloor foil insulation
VSS LTD
Providing teams that put you in total control of sales
Auckland
Ph: 09 825 0589
Mobile: 021841732
Email: luciana@vssnz.com
Website: www.vssnz.com
Call us: to find out how we can deliver an efficient and cost effective solution, we understand that every brand is unique and requires a solution and service mix that is specific to your market and brand; Key Services: ; Market intelligence ; Merchandising services ; Product knowledge/training ; Real time reporting ; Sales and merchandising services
; Sales representation ; Space management ; Stock integrity ; Vendor refill management
WEISS LTD
Ventilation, Heating and Extraction
TRIUMPH BUILDING PRODUCTS
NZ made metal flashings
VENDOR REFILL MANAGEMENT LTD
Intelligent Hardware Inventory Solutions
Auckland
20B Arwen Place, East Tamaki
PO Box 204120 Highbrook
Ph: 09 274 4113, Fax: 09 274 1880
Email: nz.sales@weiss.co.nz
Website: www.weiss.co.nz
Weiss Clear Air air extractor fans, ducting accessories and grilles, heat transfer systems; Weiss Clear Flow inline ducted air extractor fans; Weiss Clear Glow heat, fan, light, ducting combinations, home ventilation systems; Weiss
ECO Ventilation home ventilation systems; Weiss heating products bathroom IP rated, wall panel, room-space heaters; Weiss Intelli-Flow automatic extraction products; Weiss Lighting & electrical products LED Flood lights and heavy duty extension leads
Auckland
2-6 Niall Burgess St, Mt Wellington, Auckland 1060 PO Box 12303, Penrose, Auckland 1642
Ph: 09 526 6813, Fax: 09 526 6847
Email: triumph@mcalpine.co.nz
Website: www.triumphbuildingproducts.co.nz Triumph flashings, soakers, louvre vents
Hamilton
PO Box 15476, Dinsdale, Hamilton 3243
Fax: +647 825 7559
Mobile: +6421 364 604
Freephone: 0508 876 876
Email: sales@vrm.net.nz
Website: www.vrm.net.nz
Vendor Refill Management sales, merchandising
and ordering services, increasing sales to suppliers and manufacturers nationwide; VRM in store - establish and maintain planograms and bay layout guides (BLG’s); VRM market intelligence - regular communication with information targeted to the home improvement sector, market updates and key industry activities; VRM product/category management
- maintain inventory consistency and improve customer satisfaction; VRM promotions and new products - ensure
WINSTONE WALLBOARDS LTD
Auckland
37 Felix Street, Penrose 1061
PO Box 12256, Penrose 1642, Auckland, NZ
Ph: 0800 100 442, Fax: 0800 229 222
Website: www.gib.co.nz
GIB Weatherline® rigid air barrier systems; GIB® branded trade adhesives & accessories; GIB® plasterboard, cove & compounds; GIB® Rondo® metal battens & trims; GoldlineTM paper faced metal trims; Grabber® screws for plasterboard &
NZHJ FEBRUARY 2021 43
online now – go to www.hardwarejournal.co.nz DIRECTORY 2020