Page 4 - BROCHURE_Neat
P. 4

TGB DRUM EXERCISE RIG - LIST OF COMPONENTS



                  1.   Drive Motor: 3ø, 0.25 HP with approx, 50 to 300 rpm and stepless rpm regulating
                        facility controlled by RPM Regulator. Drive Motor is mounted below the working table
                        top.

                        Model:
                        A product of ABB group - BALDOR


                  2.   Limit Switches: 02 Nos of reputed make, Lever type Limit Switch are xed at two ends
                        with suitable xtures and are connected to the polarity reversal mechanism of Motor
                        Make: OMRON

                  3.   Working Table:  Dimensions  of  working  table  top  is  900mm  (Length)  X  900mm
                        (Width) X 10mm (Thick) with a height of 750mm from the ground. Top plate supported
                        on four legs of M.S. Angle of dimension 80mm X 80mm X 5mm Thick and is provided
                        with mounting holes.
                        Material of M.S. Table Top is of E.N-9 grade and M.S legs and supports are of E.N-8
                        grade. The working table is rigid and robust to withstand the vibration of motor during
                        its running conditions.

                  4.   Pulley Arrangement: Grooved pulley as per the requirement, mounted to the driving
                        shaft of motor, to drive the TGB DRUM (Pc Rod) with a rope of 2.5mm (Approx).
                        Loosening & Tightening Arrangement installed as per the requirement to adjust the
                        tightening of rope.

                  5.   Mounting Arrangement for TGB: Mounting Stand for TGB along with TRH , xed
                        on the working table top as per the requirement of mounting facility. Load Application
                        Facility installed in the desired location at the end of PC ROD with Load (Weights) of
                        05kg, in 01 kg increment.
                  6.   Instrument Panel: Instrument Panel consist of components, mentioned as under-
                        (a)  RPM Setter Switch (Speed Control Position).

                        (b)   Rpm Indicator (Rpm Meter).
                        (c)   MCB (3 Pole MCB).
                        (d)   Ammeter (Amp. Meter).

                        (e)   Timer Setting Switch (Timer).
                        (f)   Auto Manual Switch.
                        (g)   3ø Red-Yellow-Blue Indicator.
                        (h)   Emergency Stop Switch.

                        (i)   Stop-Forward- Reverse Switch.
                        (j)   Volt Meter.
                        (k)   Temperature.

                        (l)   Cycle Counter.
                        Instrumentation Panel is furnished with necessary components as per your drawing, to
                  monitor and control the required operations and time setting switch provided to set running
                  time & auto cut facility.
   1   2   3   4   5   6   7   8   9