Page 123 - U.S. Harris 8/27/19
P. 123
FORMED / PLASTIC LETTERS
Mounting Options
CAD DRAWING
CAD DRAWING
CAD DRAWING
up to 24”
CAD DRAWING
1a-Plain 90% of Price
No mounting blocks or hardware
included.
2a-Stud Price as Listed Threaded blocks are solvent
bonded to the letter backs to receive a 10-24 stud. Silicone adhesive is applied to the studs and into the drilled holes when installing. Drilling pattern is required for this installation.
2b-Pad Price as Listed Threaded blocks are solvent
bonded to the letter backs to receive the perforated pad.
Silicone adhesive is used to
adhere the perforated pads to
the installation surface. Spacing guides are available for this installation. ** Most letters 9” and under will have perforated pads bonded directly to the letter back and will have a slight stand-off.
2c-Combination Price as Listed Threaded blocks are solvent
bonded to the letter backs. The top portion of the letter receives stud through pads and the bottom pad only. Mounting procedure
is the same as 2a Stud with the addition of securing pads to the installation surface with silicone. Drilling pattern is required for this installation. ** Most letters 9” and under will have perforated pads bonded directly to the letter back and will have a stand-off.
Drill Patterns
Patterns are not sent with
orders unless requested. All stud mounted or combination mounted letters will require some type of drilling template to install.
CAD DRAWING
CAD DRAWING
CAD DRAWING
2d-Combination All Price as Listed Threaded blocks are solvent bonded
to the letter backs. All mount locations receive a stud through pad. Mounting procedure is the same as 2a Stud with the addition of securing pads to the installation surface with silicone. Drilling pattern is required for this installation.
2f-Flange
Price as Listed
Outside Bracket
Price as Listed
Standard mounting In-Line for rail, brick or block
Price as Listed
GeminiSignProducts.com
121
Letters are produced with a minimum 1/4” wide visible plastic flange, all around letter, to allow for installing with screws (not supplied).
Mounting brackets are bonded to the inside return of the letter. Fasteners (not supplied) are used to screw the letter to the installation surface.
2b-Pad
Larger letters will have an adjustable pad, while smaller letters have a fixed pad, which will create a stand-off.
Note: Outside Bracket for letters over 24” can be ordered plain, with brackets shipped loose.
CAD DRAWING
up to 24”
Note: Wire Mounts are no longer available for quotes/orders. Check with plant for availability on warranty orders. Free standing mounts are no longer a standard mount. Check with plant on availability for the balance of 2018.