Page 260 - U.S. Harris 8/27/19

ADDITIONAL INFORMATION / INSTALLATION SUPPLIES
HSTRIPS (plastic plants only)
Clear Acrylic Strips (Rails)
Adhesives
We have tested and approved Chem-Calc 1200
or GE RTV108 squeeze tubes of clear silicone,
for installing lighter and smaller letters that are mounted with studs and/or pads. Otherwise, always test your adhesive for the installation situa- tion – and use a quality silicone product.
Lighter and smaller parts can be installed with a quality silicone adhesive.
Heavier and larger letters and plaques should be installed with a “stronger” adhesive than Silicone. Always match your adhesive to the mounting
Pattern Paper
HPAPER
ITEM
3/16" x 1-1/2" x 72"
ACRYLIC STRIPS $29.73
Pattern rolls are 60# heavy white kraft paper and is marked with 1" squares. Rolls are 48" wide, and available by the foot or in rolls of 500'. (45 pounds/roll. Oversized shipping fee applies)
Used for installing plastic letters. Glue (not silicone) letters to strips and install strips on wall. Good for irregular or corrugated sur- faces. NOTE: Letters must be ordered “Pad for Rail”.
Formed plants – spacers for 10-24 studs only
Acrylic plants – spacers for 10-24 and 6-32 studssurface and product weight. If in doubt, use a
Metal plants – Spacers for all types of studs
stronger industrial adhesive or epoxy – along with appropriate anchors and/or additional structural support.
Aluminum Spacers
SPACER Aluminum
HSP
PER INCH PRICE 0.61
SIZE per foot per roll*
PRICE
$1.54 438.00
$20.00 Cutting Charge per 100 pieces. 1/4" mini- mum on aluminum spacers. The following spacer lengths are in stock: 1/8”, 1⁄4”, 3/8”, 1⁄2”, 5/8”,
3⁄4”, 7/8”, 1”, 1-1/2”, 2”. No extra cutting fee. Non-stocking custom lengths are available. Priced per inch, plus a $20 cutting fee per 100 pieces. CUTTING (fee for cutting non-stock sizes) Aluminum spacers are stocked in three sizes;
*Rolls are 500 ft., weigh 45 lbs. and ships oversized
ITEM
10 OZ. Silicone caulking tube 2.8 OZ. Silicone squeeze tube
$29.20 HSIL 24.10 HSIL
• Large - .275" I.D. (Inside Diameter) for 1/4-20 studs
• Small - .190" I.D. (Inside Diameter) for 10-24 studs
• Slim - .148" I.D. (Inside Diameter) for 6-32 and 4-40 studs; 1" max. length
Decorative Stand-Offs
SET OF 4
1/2" DIAMETER 3/4" STANDOFF
1/2" DIAMETER 1-1/2" STANDOFF
1" DIAMETER 3/4" STANDOFF
1" DIAMETER 1-1/2" STANDOFF
(103, 140, 404, 504, 604, 704)
Detachable Studs - Includes a package of 6 with (c2o6m0p,a4ti0b2le)-aIlNlenCLwUreDncEhS STUDS
UP TO 3/8" MATERIAL
$25.15
HGI83S
$31.96
HGI82S
$37.33
HGI81S
$47.16
HGI80S
1/2" - 7/8" MATERIAL
$26.26
HGI83M
$33.75
1" - 1-1/8" MATERIAL
$27.71
HGI83L
$35.31
ITEM H632DSTUD SMALL - 6-32 (1/8" diameter stud)
DETACHABLE STUDS $24.10 $25.30 $34.60
Made from premium anodized aluminum, these allow easy and
clean servicing of letters after installation. Ideal when used in
combination with lit letters, allowing access to LED modules
without the exposed hardware (typical on removable cans).
Integrating a 6-32, 10-24 or 1/4-20 stud for a 1.5” stand off.
HGI82M HGI82L
$39.11 $40.79
HGI81M HGI81L
$50.18 $52.86
HGI80M HGI80L
H1024DSTUD MEDIUM - 10-24 (3/16" diameter stud) H1420DSTUD LARGE - 1/4-20 (1/4" diameter stud)
1⁄2” diameter stand-offs: For use on smaller/lighter panels. #8 screw 1”diameter stand-offs: For use on small or larger/heavier panels. #10 screw
USE DSTUD WITH ORDERS OF LETTERS / PLAQUES
Studs* Aluminum Studs
1/8" (6-32)
3/16" (10-24)
1/4" (1/4-20)
1" 1.5"
N/A $0.41
$0.28 $0.28
N/A N/A
2" 3" 4"
$0.41 N/A N/A
$0.41 $0.47 $0.62
0.75 0.75 0.81
5" 6"
N/A N/A
$0.75 $0.93
0.81 0.93
H0632ASTUD
H1024ASTUD - ALL PLANTS
Available for:
4-40, 6-32, 10-24 & 1/4-20 studs
Additional spacers can be added to increase the stand-off.
H1420ASTUD
ITEM #/¡§" Nuts
PRICE $0.21
Stainless Steel
Studs 5/8" 1" 1.5" 2" 3" 4" 5" 6" 8"
3/32" (4-40)
1/8" (6-32)
3/16" (10-24)
1/4" (1/4-20)
3/8" (3/8-16)
N/A $0.47
0.41 0.41
0.47 0.47
N/A 1.01
N/A N/A
N/A
$0.47
0.47
N/A
N/A
$0.43 N/A N/A
0.47 $0.67 N/A
0.62 0.67 0.81
1.33 1.86 2.13
N/A N/A 4.13
N/A N/A
N/A N/A
$1.14 $1.27
2.53 2.93
N/A 6.38
N/A
N/A
N/A
N/A
$7.83
H0440SSTUD H0632SSTUD
They are now 500' rolls 45 pounds/roll Oversize fee applies Grid lines with NO Gemini markings
Supplied Allen wrenches:
1/16" allen for the 6-32 and 10-24 DetStuds 3/32" allen for the 1⁄4-20 DetStuds.
HNUTS
Available in aluminum or stain- lessNsutetse(la–luamlsionuamddor4s-4ta0inless)
10-24 STUDS IN ALL PLANTS
All others in metal plants ONLY
H1024SSTUD - WHS 402 & 260
H1420SSTUD
* We reserve the right to limit order quantities
258
H3816SSTUSpDec-iaWl lHeSng2t6h0s &in4s4ta0inless steel studs may be available. Email for quote.
WE CAN SUPPLY NUTS FOR ALL STUDS
1.800.538.8377