Page 114 - 2015 Professional Signage Catalog

Fabricated Stainless Steel
SPECIALTY MOUNTS & FINISHES
FULL FINISH BACKS: Full finish metal backs, slightly recessed or flush with returns, are soldered completely around the perimeter. Available in painted or polished stainless. A typical “Finished” back will not be soldered to the letter returns or have the same seams as the face of the letter.
DOUBLE RAILS: Mounting hardware can be set in line for rails. Gemini can provide mounting rails made of C-Channel. Ideal for ease of installation where the letters can be installed on the rails prior to leaving for jobsite. Gemini will ship rails unas- sembled from letters. Rails can be painted in any standard color.
BOTTOM & TOP RAILS: Any bottom or top stud mounted letters can also be ordered with rail for mounting. This installation method is not available on all letter types and sizes. Rails can be painted in any standard color. C-Channel is used for all rail stock. Letters in all exterior environments are recommended to have tie-backs. Gemini does not supply tie- backs for installation, as mounting surface and environmental conditions dictate the composition of the tie-backs. However, a threaded tie back mounting hole is provided in the back, near the top 8”+ of letters. Please call for quote on any bottom or top rail mounted fabricated letters.
DETACHABLE STUDS: Allows easy and clean servicing of letters up to 24” after installation. Ideal when used in combination with lit letters, allowing access to LED modules without the exposed hardware (typical on removable cans). Integrating a 1.5” stand off. Additional spacers can be added to increase the stand-off distance.
At right, the two piece detachable stud is shown. One wrench is shipped per four detachable studs. This product is also available for sale separately, see page 204.
LIGHT DIFFUSING LEXAN: Lit letters with Lexan backs are available with either clear or light diffusing Lexan. Gemini recommends using light diffusing Lexan to provide an even halo-lit appearance with any interior or glossy surface.
Light diffusing Lexan is only available in 0.177" thickness. Letters may have depth requirements in order to accomodate this gauge material and our L - brackets that are used for attachment of the back to the letter. Typi- cally, letters must be 5/8" deep or greater.
Installing on glossy surface
SPECIALTY FACE FINISHES: Two finishes have been added in 304 stainless steel: Vibration and Random Arc. These finishes are provided at no extra cost. (Max. 24”)
114
Random Arc
Vibration
1.800.538.8377
Fabricated_14.indd 114
3/27/14 4:49 PM
Metal Letters