Page 94 - 2015 Professional Signage Catalog

Flat Cut Metal
BRONZE FINISHES
Bronze Alloy: Flat Cut Bronze uses alloy C22000; 90% copper and 10% zinc – 0% Lead.
Brushed Oxidized
Price as Listed (#4 finish - Add 15%)
Dark Oxidized
Add 15%
Verde Turquoise
Patina - Add 30%
FINISH NOTES: All Patinas, by their very nature, will vary from letter to letter and order to order. These finishes will change in appearance over time depending on contact with moisture and temperature. Patinas can “bleed” onto the installation surface when installed outside.
PRECISION CUT - .02" INSIDE RADIUS
Precision Cut letters and logos are made using a fine, high pressure stream of water that carries an abrasive mineral. This allows for sharp (.02 radius) inside corners, small letters, and intricate detail on logos.
POLISHING
Polished
Add 30%
Note: Vertical grain is standard all all cut metal letters. Horizontal grain can be requested.
Polished finishes require a minimum 2" height and 1/4" depth or 3" height and 1/8" depth (stud mounts required). Restric- tions may apply on letters over 24". See page 99 for letters that are under 3” or that have polished returns.
94
1.800.538.8377
CutMetal_2014.indd 94
3/27/14 4:47 PM
Metal Letters