Page 260 - 2019 US Harris 11/6/19

ADDITIONAL INFORMATION / INSTALLATION SUPPLIES
HSTRIPS (plastic plants only)
Clear Acrylic Strips (Rails)
Adhesives
We have tested and approved Chem-Calc 1200 or GE RTV108 squeeze tubes of clear silicone,
for installing lighter and smaller letters that are mounted with studs and/or pads. Otherwise, always test your adhesive for the installation situa- tion – and use a quality silicone product.
Lighter and smaller parts can be installed with a quality silicone adhesive.
Heavier and larger letters and plaques should be installed with a “stronger” adhesive than Silicone. Always match your adhesive to the mounting
Pattern Paper
HPAPER
ITEM
3/16" x 1-1/2" x 72"
ACRYLIC STRIPS
$29.73
Pattern rolls are 60# heavy white kraft paper and is marked with 1" squares. Rolls are 48" wide, and available by the foot or in rolls of 500'. (45 pounds/roll. Oversized shipping fee applies)
Used for installing plastic letters. Glue (not silicone) letters to strips and install strips on wall. Good for irregular or corrugated sur- faces. NOTE: Letters must be ordered “Pad for Rail”.
Formed plants – spacers for 10-24 studs only
Acrylic plants – spacers for 10-24 and 6-32 studssurface and product weight. If in doubt, use a
Metal plants – Spacers for all types of studs
stronger industrial adhesive or epoxy – along with appropriate anchors and/or additional structural support.
Aluminum Spacers
SPACER
Aluminum
HSP
PER INCH PRICE
0.61
SIZE
per foot per roll*
PRICE
$1.54 438.00
$20.00 Cutting Charge per 100 pieces. 1/4" mini- mum on aluminum spacers. The following spacer lengths are in stock: 1/8”, 1⁄4”, 3/8”, 1⁄2”, 5/8”,
3⁄4”, 7/8”, 1”, 1-1/2”, 2”. No extra cutting fee. Non-stocking custom lengths are available. Priced per inch, plus a $20 cutting fee per 100 pieces. CUTTING (fee for cutting non-stock sizes) Aluminum spacers are stocked in three sizes;
*Rolls are 500 ft., weigh 45 lbs. and ships oversized
ITEM
10 OZ. Silicone caulking tube 2.8 OZ. Silicone squeeze tube
$29.20 HSIL 24.10 HSIL
• Large - .275" I.D. (Inside Diameter) for 1/4-20 studs
• Small - .190" I.D. (Inside Diameter) for 10-24 studs
• Slim - .148" I.D. (Inside Diameter) for 6-32 and 4-40 studs; 1" max. length
103,140,404,504,604,704 (stocking and letter/logo orders)
Decorative Stand-Offs
403,503,603,703 (letter/logo orders only – send stocking only orders to acrylic plDaentasc)hable Studs - Includes a package of 6 with
SET OF 4
1/2" DIAMETER 3/4" STANDOFF
1/2" DIAMETER 1-1/2" STANDOFF
1" DIAMETER 3/4" STANDOFF
1" DIAMETER 1-1/2" STANDOFF
UP TO 3/8" MATERIAL
$25.15
HGI83S
$31.96
HGI82S
$37.33
HGI81S
$47.16
HGI80S
1/2" - 7/8" MATERIAL
$26.26
HGI83M
$33.75
1" - 1-1/8" MATERIAL
$27.71
HGI83L
$35.31
compatible allen wrench (260, 402)-INCLUDES STUDS
H632DSTUD
H1024DSTUD MEDIUM - 10-24 (3/16" diameter stud)
ITEM
DETACHABLE STUDS
$24.10
$25.30
H1420DSTUD LARGE - 1/4-20 (1/4" diameter stud)
Made from premium anodized aluminum, these allow easy and
SMALL - 6-32 (1/8" diameter stud)
HGI82M HGI82L
$39.11 $40.79
HGI81M HGI81L
$50.18 $52.86
HGI80M HGI80L
$34.60
1⁄2” diameter stand-offs: For use on smaller/lighter panels. #8 screw 1”diameter stand-offs: For use on small or larger/heavier panels. #10 screw
clean servicing of letters after installation. Ideal when used in
combination with lit letters, allowing access to LED modules
without the exposed hardware (typical on removable cans).
Integrating a 6-32, 10-24 or 1/4-20 stud for a 1.5” stand off.
10-24 STUDS IN ALL PLANTS
All others in metal plants ONLY
Supplied Allen wrenches:
1/16" allen for the 6-32 and 10-24 DetStuds 3/32" allen for the 1⁄4-20 DetStuds.
USE DSTUD WITH ORDERS OF LETTERS / PLAQUES
Additional spacers can be added to increase the stand-off.
Studs* Aluminum Studs
1/8" (6-32)
3/16" (10-24)
1/4" (1/4-20)
1" 1.5"
N/A $0.41
$0.28 $0.28
N/A N/A
2" 3" 4"
$0.41 N/A N/A
$0.41 $0.47 $0.62
0.75 0.75 0.81
5"
N/A
$0.75
0.81
6"
N/A
$0.93
0.93
H0632ASTUD
H1024ASTUD - ALL PLANTS
Available for:
4-40, 6-32, 10-24 & 1/4-20 studs
HNUTS
Available in aluminum or stain- lessNsutetse(la–luamlsionuamddor4s-4ta0inless)
H1420ASTUD
ITEM
#/¡§" Nuts
PRICE
$0.21
Stainless Steel
Studs 5/8" 1" 1.5" 2" 3" 4" 5" 6" 8"
3/32" (4-40)
1/8" (6-32)
3/16" (10-24)
1/4" (1/4-20)
3/8" (3/8-16)
N/A $0.47
0.41 0.41
0.47 0.47
N/A 1.01
N/A N/A
N/A
$0.47
0.47
N/A
N/A
$0.43 N/A N/A
0.47 $0.67 N/A
0.62 0.67 0.81
1.33 1.86 2.13
N/A N/A 4.13
N/A N/A
N/A N/A
$1.14 $1.27
2.53 2.93
N/A 6.38
N/A
N/A
N/A
N/A
$7.83
H0440SSTUD H0632SSTUD
H1024SSTUD - WHS 402 & 260
H1420SSTUD
* We reserve the right to limit order quantities
258
H3816SSTUSpDec-iaWl lHeSng2t6h0s &in4s4ta0inless steel studs may be available. Email for quote.
WE CAN SUPPLY NUTS FOR ALL STUDS
1.800.538.8377
They are now 500' rolls 45 pounds/roll Oversize fee applies Grid lines with NO Gemini markings