Page 250 - 2017 US Professional Signage Catalog

ADDITIONAL INFORMATION / INSTALLATION SUPPLIES
Clear Acrylic Strips (Rails)
ITEM ACRYLIC STRIPS
3/16" x 1-1/2" x 72" $26.60
Used for installing plastic letters. Glue (not silicone) letters to strips and install strips on wall. Good for irregular or corrugated sur- faces. NOTE: Letters must be ordered “Pad for Rail”.
Adhesives
Lighter and smaller parts can be installed with a quality silicone adhesive.
Heavier and larger letters and plaques should be installed with a “stronger” adhesive than Silicone. Always match your adhesive to the mounting surface and product weight. If in doubt, use a stronger industrial adhesive or epoxy – along with appropriate anchors and/or additional structural support.
ITEM
10 OZ. Silicone caulking tube $26.10 2.8 OZ. Silicone squeeze tube 21.55
Pattern Paper
Pattern rolls are 60# heavy white kraft paper and is marked with 1" squares. Rolls are 48" wide, and available by the foot or in rolls of 400'.
SIZE
per foot per roll*
PRICE
$1.37 392.00
Aluminum Spacers
SPACER
Aluminum
PER INCH PRICE
0.54
*Rolls are 400 ft., weigh 40 lbs. and ship via UPS
Detachable Studs - Includes a package of 6 with wrench
$20.00 Cutting Charge per 100 pieces. 1/4" minimum on aluminum spacers. The following lengths are in stock and ready to ship – 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/2", 2".
Aluminum spacers are stocked in three sizes;
• Large - 1/4" I.D. (Inside Diameter) for 1/4-20 studs • Small - 3/16" I.D. (Inside Diameter) for 10-24 studs • Slim - 1/8" I.D. (Inside Diameter) for 6-32 and 4-40
ITEM
SMALL - 6-32 (1/8" diameter stud)
MEDIUM - 10-24 (3/16" diameter stud)
LARGE - 1/4-20 (1/4" diameter stud)
DETACHABLE STUDS
$21.50
$22.60
$30.90
studs; 1" max. length
Made from premium anodized aluminum, these allow easy and clean servicing of letters after installation. Ideal when used in combination with lit letters, allowing access to LED modules without the exposed hardware (typical on removable cans). Integrating a 6-32, 10-24 or 1/4-20 stud for a 1.5” stand off. Additional spacers can be added to increase the stand-off.
Nuts
For 6-32, 10-24, 1/4-20 studs
Studs*
Aluminum Studs
1/8" (6-32)
3/16" (10-24)
1/4" (1/4-20)
Stainless Steel Studs
3/32" (4-40)
1/8" (6-32)
3/16" (10-24)
1/4" (1/4-20)
3/8" (3/8-16)
1" 1.5"
N/A $0.36
$0.24 $0.24
N/A N/A
2" 3"
$0.36 N/A
$0.36 $0.42
0.66 0.66
4"
N/A
$0.54
0.72
5" 6" 8"
N/A N/A N/A
$0.66 $0.83 N/A
0.72 0.83 N/A
ITEM
#/¡§" Nuts
PRICE
$0.18
5/8" 1" 1.5" 2" 3" 4" 5" 6" 8"
N/A $0.42
0.36 0.36
0.42 0.42
N/A 0.89
N/A N/A
N/A
$0.42
0.42
N/A
N/A
$0.42
0.42
0.54
1.19
N/A
N/A
$0.59
0.59
1.66
N/A
N/A
N/A
0.72
1.90
3.68
N/A
N/A
$1.01
2.26
N/A
N/A N/A
N/A N/A
$1.13 N/A
2.61 N/A
* We reserve the right to limit order quantities
240
1.800.548.3356
5.70
$7.00
Special lengths in stainless steel studs may be available. Email for quote.