Page 52 - 2017 US Professional Signage Catalog

METAL LETTERS / CAST
Mounting Options
Go to GeminiSignProducts.com to view, print or save .pdf CAD drawings of all mounting and construction options. (Cast Metal > Resources)
Flush Stud
Price as Listed
3A - Double Rail Mount
Add 35% to brushed letter price. Includes painted or anodized c-channel rails.
Projected Jam Nut Mount
Price as Listed
Corrugated Mount
Price as Listed
3C - Bottom or Top Stud
Add 15% to brushed letter price. Letters 4”-24”, Minimum 3/8” thick Letters over 8” may require tie-back (not supplied).
Stud Specifications
Projected Spacer Mount
Price as Listed
Flat Metal Wall Mount
Price as Listed
3D - Bottom Back Angle Bracket Mount
Add 35% to brushed letter price. Letters 4”-24”, Minimum 3/8” thick. Letters over 12” may require tie-back (not supplied). Angle iron is 2” x 2” with a painted finish.
• Metal spacers available upon request (just specify stand-off distance).
• Stud holes are in line for brick 2-5/8" CM (center mortar) as a standard. Also available in line for block 8" CM.
• Custom stud boss placement on cast, add $12 per letter.
1.800.538.8377
Most bottom or top stud mounted letters are available with C-Channel rails for mounting. Letters will be pre-assembled in our shop to insure a proper fit. Smaller letters will be left assembled, larger letters are removed from rails for shipping. Letters over 8” high should be installed with the use of tie-backs (not supplied). C-Channel rails are available painted or anodized with cast letters. C-Channel rails are designed to be mounted to load structures - hardware and location to be determined by the installer. Additional 8’ long C-Channel rails also available: $75. All C-Channel rails are for letter support. Not designed for structural support. .5” deep x 1” or 1.5” wide. 1” deep x 2” or 3” wide.
48
•
• •
•
Cast letters under 15" are shipped with 10/24 threaded studs-standard. (Thin strokes, 4/40 or 6/32 studs).
Cast letters 15"+ are shipped with 1/4-20 studs-standard.
Cast Aluminum letters - Aluminum studs standard (Stainless steel available upon request).
Cast Bronze letters - Stainless steel studs are standard.
3B - Bottom & Top Rail Mount
Add 35% to brushed letter price. Letters 4”-24”, Minimum 3/8” thick Includes painted or anodized c-channel rails. Letters over 8” may require tie-back (not supplied).