Page 18 - US Harris 9/3/19

METAL LETTERS / FLAT CUT
DF Tape – available in aluminum up to 6”high – included in 1/8”price NO FULL Coverage
Mounting Options
Go to GeminiSignProducts.com to view, print or save .pdf CAD drawings of all mounting and construction options. (Flat Cut Metal > Installation)
SPLIT STENCIL is a LAYOUT code options: STENCIL SPLIT STENCIL STENCIL COMB PATTERN
Plain Mount
Letters and logos are supplied with no mounting holes or hardware. Note: Most metal finishes do require some processing holes on letters backs - even with Plain mounts
3A - Double Rail Mount
Add 35% to brushed letter price. Includes two flat 1/4” painted rails. Letters pre-assembled to rails. Typical with 4” - 24” letters. C-channel and anodized finish optional
Stud Mount
Backs of letters and logos, at least 1⁄4”thick, are drilled and tapped to receive threaded studs, for mounting to wall. Optional alignment for brick, block or rails.
3B - Bottom & Top Rail Mount
Add 35% to brushed letter price. Letters 4”-30”, Minimum 3/8” thick Includes painted or anodized aluminum rail. Letters over 8” may require tie-back (not supplied).
Stud Boss Stud Weld
Welded Stud Mount
Backs of 1/8”thick letters and logos are supplied with welded stud bosses (to receive studs) or 1” long welded studs, for mounting to wall.
2. 1/8” thick back
a. Select mount option
b. Enter separate line item H3TSTUD (TOP Stud) Qty:1 H3BSTUD (BOTTOM Stud) Qty:1
Stud
3B - Bottom & Top Rail Mount
Add 15% to brushed letter price. Letters 4”-30”, Minimum 3/8” thick. Letters over 8” may require tie-back (not supplied).
Single Rail Mount
Add 35% to brushed letter price. Includes one flat 1/4” painted rail. Letters pre-assembled to rail. Typical with 4” - 8” letters. C-channel and anodized finish optional.
CAD DRAWING
1. Select Option in C-METAL RAILS
3D - Bottom Back Angle Bracket Mount
Add 35% to brushed letter price. Letters 4”-30”, Minimum 3/8” thick. Letters over 12” may require tie-back (not supplied). Angle iron is 2” x 2” with a painted finish.
CAD DRAWING
CAD DRAWING
CAD DRAWING
1. Select Option in C-METAL RAILS
1. Select Option in C-METAL RAILS
1. Select Option in MOUNT GROUP
2. Enter separate line item H3SRAIL (Single Rail) Qty:1 H3DRAIL (Double Rail) Qty:1
2. Enter separate line item
H3TRAIL (TOP Rail) Qty:1 H3BRAIL (BOTTOM Rail) Qty:1
2. Enter separate line item H3ARAIL Qty:1
1/8” ALUMINUM FINISHES NOTES
Price as Listed
Add 30%
Add 10%
Add 25%
Add 15%
Add 50%
Add 45%- Brushed Anodized
Add 75%- Polished Anodized
• Custom paint color add 10% plus $20/color (specialty paints may be additional)
• Drill Patterns/Stencil Guides:
1-10 characters = $41.65 11-20 characters = $83.30 21-50 characters = $133.30 51+ characters = $249.98
• Cut file available - $41.65 (no stud locations)
2111
Primed for Paint
Painted
1140
#4 Brushed
1200
Clear Anodized
1260
Champagne
1210
Gold
1250
Light Bronze
1240
Medium Bronze
1230
Dark Bronze
1220
Black
16
1.800.538.8377
1100
Brushed
1521
1520
Random Arc
4666P
Rust Powdercoat
1111
Polished
1201
1211
NOTE: These highlighted finishes require a minimum .5” stroke (stud welds required). Restrictions may apply on letters & logos over 24". Gemini can match your shade of any standard anodized color (sample required). The color of anodized letters will vary from order to order due to the anodizing process.
1251
Light Bronze
1241
Medium Bronze
1231
Dark Bronze
1221
Orbital
Clear
1261
Champagne
Gold
Black