Page 38 - 2020 US HARRIS Letters & Logos 2-13-20

M _ _ COPP125 (for letters) M00COPP125BAR (for bars) M00COPP125(for logos)
PATTERN & STENCIL options are in LAYOUT code
DF Tape – avail. Up to 4”high – included in 1/8”price
RESTRICTIONS WHERE TO SEND
1Ӡ
1.5Ӡ
2”
COPPER FINISHES PRICE NOTES MOUNTING OPTIONS
1100
1325
1300
1314
1200
1111
LOGOS LESS THAN 100Sq”
Priced as letter using max. dimension
(403)-IA ONLY
1/8" Thick Brushed Copper Letters
Copper Alloy: C11000
PRICE PER LETTER. Brushed with no mounts. Stud weld available – ADD 15%.
The table below shows base pricing for 1/8” thick brushed copper letters and logos. Use the COPPER FINISHES information below to calculate the price for any other finish.
Gemini recommends 1/4” thick if stud mounts are required.
Letter Size (max. dimension) Lower Case is 75% of corresponding Upper Case price Small punctuation, such as comma, period and dash are 33% of Upper Case price. Size 3” 4” 5” 6” 7” 8” 9” 10” 11” 12” 13” 14” 15” 16” 17” 18” 19” 20”
Price $29 $30 $31 $36 $42 $54 $65 $80 $90 $113 $128 $147 $164 $183 $201 $223 $247 $280 $309 $342 $381
= Plain Mount Only †1” & 1-1/2” Upper case only
Size 21” 22” 23” 24” 25”* 26”* 27”* 28”* 29”* 30”* 31”* 32”* 33”* 34”* 35”* 36”* 37”* 38”* 39”* 40”* 41”+ Price $424 $464 504 544 592 640 688 735 782 830 876 929 986 1,038 1,093 1,143 1,197 1,252 1,306 1,359 EMAIL
*Oversize charges will apply
Custom logo Pricing Email Sales@GeminiSignProducts.com
Price as Listed
Brushed
Add 15%
#4 Brushed
Lt Oxidized
Add 30%
Polished
Add15%
Oxidized
Dark Oxidized
• Perfect Patterns:
1-5 characters = $16.65 6-15 characters = $33.30 16-25 characters = $83.30 26-50 characters = $133.30 51+ characters = $249.98
• Stencil Guide:
1-50 characters = $41.65
• Cut file available - $41.65 (no stud locations)
1/8” thick
Stud Weld Stud Boss
All 1/8” letters
with a .5” stroke and up can include stud weld. Available with 3/8” long stud bosses or 1” welded studs.
1/4” & up
Drill & Tap
All 1/4” letters & up with a .25” stroke are drilled and tapped for a blind stud mount.
Polishing requires a minimum of .5” stroke at 1/8” thick (stud weld required). Restrictions may apply on letters/logos over 24”.
3/8”+ BOTTOM STUD +15%
36
1.800.538.8377