Page 20 - 2021 Canada Letters & Logos

Metal Mounting Options
Go to GeminiSignage.com to view, print or save .pdf CAD drawings of all mounting and construction options. (Flat Cut Metal > Installation)
Plain Mount
Letters and logos are supplied with no hardware. Note: Most metal finishes do require some processing holes even with Plain mounts
3A - Double Rail Mount
Includes two flat 1/4” painted rails. Typical with 4” - 24” letters. C-channel and anodized finish optional. Email for quote.
Double Face Tape Mount
Available in full coverage or strips, depending on letter size.
Email for quote.
Stud Mount
Backs of letters and logos, at least 1⁄4”thick, are drilled and tapped
to receive threaded studs, for mounting. Optional alignment for brick, block or rails.
3B - Bottom & Top Rail Mount
Letters 4”-30”, Minimum 3/8” thick Includes painted (optional anodized) aluminum rail. Letters over 8” may require tie-back (not supplied). Email for quote.
Stud Boss Stud Weld
Welded Stud Mount
Backs of 1/8”thick letters and logos are supplied with welded stud bosses (to receive studs) or 1” long welded studs, for mounting.
3B - Bottom & Top Stud Mount
Letters 4”-30”, Minimum 3/8” thick. Letters over 8” may require tie-back (not supplied). Email for quote.
Single Rail Mount
Includes one flat 1/4” painted rail. Typical with 4” - 8” letters. C-channel and anodized finish optional. Email for quote.
3D - Bottom Angle Bracket Mount
Letters 4”-30”, Minimum 1/4” thick. Letters over 8” may require tie-back (not supplied). Angle bracket has a painted finish and optional anodized finish. Email for quote.
18
1.800.265.0426