Page 1202 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 1202

2.13                                                                                                                                      2-27



                                   3                                                                                         Traction will be adversely  2006 FLSTFSE 2 : Chassis
                                                               Figure 2-22. Clutch Release Cover See Figure 2-23. Install new o-ring on end of clutch fluid  Figure 2-23. Clutch Fluid Line O-ring (typical) Thread in and finger tighten flare nut fastening clutch  1WARNING 1WARNING Be sure NO clutch fluid gets on tires, wheels or brakes affected which could result in loss of control of the  1WARNING 1WARNING Do NOT allow dirt or debris to enter the clutch master cylinder reservoir. Dirt or debris in the reservoir can cause improper operation of the clutch and equipment








                                           2

                                                       Bleeder valve  Flare nut  Clutch fluid line                            when adding clutch fluid.   damage. (00205a)
                           1                                                                                  fluid line to clutch release cover.   Install clutch fluid line bracket.  motorcycle and death or serious injury.




                       10510                                          line.   9994
                                                       1.  2.  3.  13.                                     14.   15.









              CLUTCH FLUID LINE  REPLACEMENT  1WARNING 1WARNING Be sure NO clutch fluid gets on rear tire, wheel or brakes when draining clutch fluid.  Traction will be adversely affected which could result in loss of control of the motorcycle and death or serious injury. See Figure 2-22. Place a suitable container under clutch Loosen the clutch master cylinder/reservoir cover. Loosen flare nut and allow clutch fluid to drain. Remove flare nut on outside of the clutch release cover.   Drain clutch fluid line.  NOTE Dispose of clutch fluid in accordance with local regulations. See Figure 2-23. Remove and discard o-ring.   NOTE Clutch fluid line o-ring may stick to inside o
















          HOME                             1.  release cover.   2.  3.  4.  5.  6.  7.  line from frame.  8.  9.  10.  11.  10509              12.
   1197   1198   1199   1200   1201   1202   1203   1204   1205   1206   1207