Page 473 - Performance-Health-Canada-eCatalog-2018-2020
P. 473

Rolyan® Aquaplast®-T Watercolors  Splinting
Material Stretch
Rolyan® Aquaplast®-T
Temperature Time
1⁄16” (1.6mm) 160° to 170° F (70° to 75°C) water for 35 seconds 3⁄32” (2.4mm) 160° to 170° F (70° to 75°C) water for 1 minute 1⁄8” (3.2mm) 160° to 170° F (70° to 75°C) water for 1 minute
Moderate resistance
1⁄16” (1.6mm) 1 to 2 minutes of working time 3⁄32” (2.4mm) 2 to 3 minutes of working time 1⁄8” (3.2mm) 4 to 6 minutes of working time
Aquaplast®-T Watercolors Handling Characteristics
The optimum combination of intimate conformability and resistant stretch
• 100% memory allows repeated reheat-
ing and economical splint revisions
• 13% UltraPerf® perforation pattern is ideal for lightweight finger or hand splints requiring breathability
Aquaplast-T® Sample Pack
• 19% OptiPerfTM perforation pattern
provides superior ventilation for comfort
while maintaining material strength and easy edge finishing
• Edges trim easily
For a temporary bond, pinch heated surfaces together;
for a permanent bond, remove coating with liquid remover or by scraping with a sharp instrument or sand paper
• Beige is also available without coating.
• Aquaplast Original
Recommended Uses
• Ideal for serial splints
• Hand, wrist, finger and thumb splints
• Dynamic outrigger bases
For elbow and knee splints using the pinch technique, see page 471.
Lower Extremity Splinting.
Aquaplast thermoplastics are the leading choice for easy-to-fabricate, economical and durable lower extremity splints.
• 1⁄16” (1.6mm) and 3⁄32” (2.4mm) – non-weight-bearing splints for infants and young children
• 1⁄8” (3.2mm) – splints for weight-bearing and ambulation for young children and positioning for adolescents and adults
• 3⁄16” (4.8mm) – weight-bearing and ambulation splints for large children, adolescents and adults
3/32” (2.4mm) Aquaplast-T solid white, 1/8” (3.2mm) Aquaplast-T Watercolors hot pink solid, 1/8” (3.2mm) Aquaplast-T Watercolors electric blue solid, 1/8” (3.2mm), Aquaplast-T Watercolors spring green solid, 1/8” (3.2mm) Aquaplast-T white 1% perf,
3/16” (4.8mm) Aquaplast-T white 1% perf. Latex free.
Great for the small clinic that needs a variety of thicknesses, colors and perforation patterns. Contains one each of the following, all of which measure 6”x 9” (15 x 23cm): 1/16” (1.6mm) Aquaplast-T white Superperf,
“Bold” Pack
“Pastel” Pack
For Aquaplast-T Watercolors, see pages 473- 475
Rolyan® “Bold” Watercolors Pack.
Contains one each of purple, hot pink, charcoal and red. 555987 1/16” (1.6mm) 13% Ultraperf®
550530 1/8” (3.2mm) Solid
550531 1/8” (3.2mm) 19% Optiperf
Rolyan® “Pastel” Watercolors Pack.
1/8” packs contain one each of spring green, beige, lavender and pastel blue.
550532 1/8” (3.2mm) Solid
For further details regarding Aquaplast Original, please see page 470.

   471   472   473   474   475