Page 458 - Performance Health | Formerly Patterson Medical

Material Stretch
Rolyan®
Aquaplast® ResilientTM
Temperature Time
1⁄16” (1.6mm) 150° to 160° F (65° to 70°C) water for 35 seconds 1⁄8” (3.2mm) 160° to 170° F (70° to 75°C) water for 1 minute
Maximum resistance
1⁄16” (1.6mm) 1 to 2 minutes of working time 1⁄8” (3.2mm) 4 to 6 minutes of working time
1/16” x 18” x 24” (1.6mm x 46cm x 61cm)
1/8” x 18” x 24” (3.2mm x 46cm x 61cm)
Color
4 Per Case
Single Sheet
4 Per Case
Single Sheet
Solid
13% UltraPerf®
Solid
Solid
Solid
A962-62-C4
A962-61-1
A962-62
A962-63-C4
A962-63
White
$268.65
$99.50
$80.75
$297.50
$92.30
1/16” x 18” x 24” (1.6mm x 46cm x 61cm)
1/8” x 18” x 24” (3.2mm x 46cm x 61cm)
Color
4 Per Case
Single Sheet
4 Per Case
Single Sheet
13% UltraPerf®
Solid
13% UltraPerf®
Solid
Solid
Solid
5501-39
A964-40-C4
5501-38
A964-40
A964-42-C4
A964-42
White
$299.50
$270.65
$95.50
$82.80
$286.20
$91.40
See pages 540-542 for Splint Pans to heat splinting material.
Aquaplast® Resilient.
For more information regarding 6”x 9” Aquaplast Resilient, please call 1-800-323-5547.
Splinting Rolyan® Aquaplast® Resilient
Rolyan® Aquaplast®-T ResilientTM. (with non-stick coating) Handling Characteristics
Aquaplast® ResilientTM is a non-draping material that provides the control needed for proper conforming.
• Translucent when heated
• 100% memory allows repeated reheating and economical
splint revisions
• Edges trim easily
• Latex free
Aquaplast®-T ResilientTM (with non-stick coating)
Aquaplast® Original ResilientTM (without non-stick coating)
Bond-Ability
• ResilientTM-T—For a tem-
porary bond, pinch heated surfaces together; for a perma- nent bond, remove coating.
• ResilientTM Original — bonds permanently when heated
Recommended Uses
• Splints that require revisions • Serial splints
• Large splints
• Splints for spasticity
• Elbow and back splints • Ankle stirrup splints
• Foot drop splints
458
Call toll-free 1.800.323.5547 fax 1.800.547.4333
1/16” 19% Optiperf
1/16” 13% Ultraperf ®
Splinting