Page 542 - Performance Health | Formerly Patterson Medical

Inside Tank Dimensions
Outside Tank Dimensions*
241/2”W x 19”D x 5”H (62.2 x 48.3 x 12.7cm)
281/2”W x 21”D x 7”H (72.4 x 53.3 x 17.8cm)
To increase the lifetime of stainless steel consider the following:
3. Rinse, rinse, rinse. If you use chlorinated cleaners, you must rinse, rinse and wipe dry immediately. After wiping down, allow air dry to keep stainless steel’s passivity film.
1. Use the proper tools. Be sure to use non-abrasive tools when cleaning stainless steel. Soft cloths and plastic scouring pads will not harm the steel’s layer.
2. Clean with the polish lines. When visible lines are present, always scrub in a par- allel motion to them. When lines cannot be seen,use a soft cloth or plastic scouring pad.
Recommended Cleaners for Speci c Situations
Situation Cleaner Comment
Routine Cleaning 4 Soap, Ammonia, Detergent, Medallion 4 Apply w/ cloth or sponge
Fingerprints & Smears 4 Arcal 20, Lac-O-Nu, Ecoshine 4 Provides barrier film
Stubborn Stains/Discoloration 4 Cameo, Talc, Zud, First Impression 4 Rub in direction of polish lines
Grease & Fatty Acids, Blood 4 Easy-Off, De-Grease It, Oven Aid 4 Excellent removal on all finishes
Restoration/Passivation 4 Benefit, Super Sheen
Splinting
Splint Pans
Forma-Splint 1600 Series Splint Pans.
These high-quality splint pans are capable of handling the largest splinting material sizes in the industry. With interior dimensions of 22”D x 26”W x 5”H and exterior dimensions
of 245/8”D x 331/2”W x 8”H, these pans facilitate sizes up through and including a head, neck and shoulder splint. These units are manufactured completely out of stainless steel and are available in either Digital or Analog models, making them the most versatile bath in the industry.
The Digital series features a digital PID-display for controlling and viewing of the water temperature within +/- 2 degrees.
The Analog series has a manual adjustable thermostat that can be set to meet any thermoplastic material specifications.
Both units include a 1440-watt heating element, which provides quick heat-up and even distribution of heat. They also feature a 1-year warranty and are MET Lab listed.
0815-67-155 0815-67-163 0815-67-171 0815-67-189
Digital
Analog
Digital - 220V Analog - 220V
$2,657.00 $2,231.00 $2,845.00 $2,420.00
Clinic Forma-SplintTM Pan. Dual ther-
mostat maintains desired temperature for low- temperature thermoplastics. Two settings: 160°F (71°C) and
l75°F (79°C). Pan will warm 3” (7.6cm) of cold water in about
90 minutes. Pan accommodates a standard sheet of thermoplastic material. Splint pan cover is insulated, hinged and will catch con- densation. Convenient drain at back of left panel. 12 amps, 1440 watts while warming and 480 watts when maintaining temperature (use A440-10 thermometer). Grounded hospital-grade plug. MET Lab listed and CE conforming. Weighs 46 lbs. (17.7kg). 1-year manufac- turers warranty. Split lid.
7261 $2,068.00
*Add 2.5” (6.4cm) to longest outside dimension for drainage spout.
542
Call toll-free 1.800.323.5547
fax 1.800.547.4333
Splinting