Page 16 - Paul N Gardner offerings for Sherwin Williams

HOT POT WITH DIGITAL READOUT
With the addition of a thermostatically controlled te on-lined aluminum pot, Gel Times can be determined at temperatures up to 350°F. Throw away aluminum cups are used.
TO OPERATE Set the in nite control to desired test temperature. Pour the material sample into throwaway aluminum cup, place cup in “hot pot”, insert wire stirrer, set counter to zero, and switch on. After gel occurs, read gel time and discard cup and stirrer.
Adjustable thermostat, Pilot Light, 3 Wire, Grounded Cord Set These “Hot Pots” can be left on full setting overnight without harm
Call For Pricing
See Our Complete Line at www.gardco.com
POSITECTOR SHD VERIFIER
Shore Hardness Durometer Accuracy Veri cation Kit
Ideal for checking the accuracy and operation of Shore hardness durometers and an important com- ponent in ful lling both ISO and in-house quality control requirements.
The PosiTector SHD Veri er and the included docu- ments allow the user to certify the accuracy of the PosiTector SHD Shore Hardness Durometers in- house.
HA-656110
PosiTector SHD Veri er....$3,995.00
DUROMETER OPERATING STANDS
Models 7000A & 7000D ASTM D2240 Type 2
The 7000A and 7000D durometer operating stands were engineered to t all PTC® durometer styles. The Classic Style and the Ergo Style mount right on the stand. For the e2000TM and Pencil Style Durometers, a small mounting knob is included.
Mechanical operating stands that deliver a load suf cient to overcome the spring force of the durometer smoothly and without shock in approximately 1 second from contact. Most other mechanical stands apply an increasing load over time which gives inconsistent and inaccurate readings. Since rub- ber, plastic and elastomeric materials creep over time, it is essential that the load be applied promptly.
HA-7000A Durometer Operating Stand, for A, B, O,E Durometers..$2,400.00 HA-7000D Durometer Operating Stand, for C, D and DO Durometers....2,800.00
GS3 GARDNER/SWARD HARDNESS ROCKER
For Measuring The Hardness Of Paint And Most Any Other Non-Metallic Material
• New Model GS3 now includes a Mems Accelerometer/Micro- controller with Auto-Calibration
• Calibratin settings stored and retained in NVRAM (Non-Volatile Random Access Memory)
• Rocker Cycle Counts are Electronically Determined and Registered on a Liquid Crystal Display (LCD)
• Automatically Starts and Stops Cycle Count
• State-of-the-Art Design
• One-Piece Construction for Accuracy and Permanence
HA-1025.......$2,295.00
Paul N. Gardner Co., Inc. • www.gardco.com • (954) 946-9454 • 1-800-762-2478