Page 25 - Paul N Gardner offerings for Sherwin Williams

S.A.M. TESTER
Scratch, Adhesion and Mar Tester, A Pocket Size Universal Instrument
Loading Handle For Measuring. The Paint Chemist’s “Educated Knife”
Gardco / Hoffman Tester - The basic concepts of the original Hoffman instrument have now been en- gineered into a much more useful instrument. The original cylindrical cutter has been retained but the cumbersome beam/weight/trolley arrangement has been replaced by a shirt pocket sized, self- contained
instrument. The new design is truly portable and can be used in any position. It is only 5 inches long, 2 inches high and, excluding the control dial and locking nut, is less than 0.67 inch thick. The instrument body is machined from solid nylon
to prevent marring of the test material surface and results in a weight of less than 5.5 ounces.
PA-5050 S.A.M. Tester comes complete w/ installed Gardco/Hoffman Cutter.............................$1,599.00
SPRING LOADED ROLLER APPARATUS
For Cleanliness Tape Test ISO 8502-3 as mentioned in Procedure 6.2b
Uniform pressure can be applied to the cleanliness tape by means of the Gardco Cleanliness Tape Roller. The top of the Red indicator ring is calibrated to 4kg (39.2 N) while the bottom indicates 5kg (49 N) force calibration.
The CTR is made of selected materials that provide basically main- tenance free service until components wear out. We do not recom- mend lubrication in any areas. This also will prevent contamination of the tape or test area from excess lubrication. The CTR external surfaces can be cleaned with a non-chlorinated solvent (Ensolv, etc.) or spray cleaner (409, Spray Nine, etc.). The CTR should not be immersed in a cleaner.
FISCHERSCOPE ST200
PA-980003 ....$895.00
Automated Scratch Testing System for Analyzing the Adhesion and Cohesion Strength of Coatings
ASTM C1624, ISO 20502, and DIN EN 1071-3
The FISCHERSCOPE® ST200 is a progressive load scratch tester for analyzing the adhesion and cohesion strength of coatings accord- ing to ASTM C1624, ISO 20502, and DIN EN 1071-3. The instru- ment is perfectly suitable for measurement in development, quality assurance, incoming inspection and process control.
Typical elds of application:
• Hard material coatings (PVD, CVD)
• Automotive engine and drive train components
• Electroplated coatings (decorative, functional)
• Characterization of hard anodic coatings
• Materials used speci cally in medical technology
applications
• Electronic components, connectors, bond wires,etc.
• Plasma-applied coating systems
PA-F605812 Fischerscope ST200.......P.O.R.
Call to con rm Sherwin-Williams discounted pricing for resale.