Page 208 - Roberston & Sinclair Catalogue

Jigsaw Blades
The productive power of a saw blade depends on the base material quality, the kind of toothing and the tooth geometry.
These factors guarantee in conjunction with the correct use of the machine and blade selection the optimum result in cutting all materials.
QUALITY, GERMAN JIGSAW BLADES
Wide range available to suit:
Softwood Hardwood Plywood
Chip Board M.D.F Wood with Nails Laminate Steel Pipes Sheet Metal Aluminium Non-ferrous Metals Plastics Perspex Carbon Fibre Fibre Glass
OUR MATERIAL QUALITIES
Alloyed tool steel. High speed steel.
Alloyed tool steel with hard metal or diamond coating, tungsten carbide teeth or toothed hard metal ledge.
Flexible electron beam welded joint of high temperature alloyed sprung steel as backing material and high speed steel on the cutting edge to meet the highest demands given to a blade during use.
Advantages against standard high speed steel blades: • Optimum cutting efficiency;
• Prolonged service life;
• Flexible making it virtually unbreakable.
WILPU 54x3.0 PITCH
Carbide coated, coarse-grained.
Glass, ceramics, glass-fibre reinforced products.
WILPU 75x2.5 PITCH
Conically ground blade, teeth diagonally sharpened.
Clean cut: all wood types (< 30mm), plastics. WILPU 91x2.5 PITCH
Conically ground, teeth 3-times sharpened, patented geometry.
Especially for clean and fast cuts in all types of wood < 60mm and plastic.
WILPU 50x1.35 PITCH
Conically ground blade, teeth diagonally sharpened, tapered toothing.
Clean curve cuts in softwood, plywood, laminate
(< 15mm).
WILPU 75x2.5 PITCH
Conically ground blade, teeth diagonally sharpened. Reverse teeth.
Clean, splinterfree surface cuts in all wood types (< 30mm), plastics.
KIND OF TOOTHING
Side set toothing: rough cuts.
Wavy set toothing: fine and clean cuts.
Conically ground blade, teeth diagonally sharpened toothing: precise, clean cuts.
Side set, diagonally sharpened toothing: rough, quick cuts.
JIGSAW BLADES
DESCRIPTION
JSHS:WPD1 JIGSAW BLADES F/GLAS
JSHS:HC12 JIGSAW BLADES
JSHS:HC123 JIGSAW BLADES SUPER
JSHS:HC12K JIGSAW BLADES
JSHS:HC12R JIGSAW BLADES
GENERIC NO. UNIT
T130RIFF PKT3
T101B PKT5
T234X PKT5
T101AO PKT5
T101BR PKT5
PART NO. WILD1/3PC
WILHC12
WILHC123
WILHC12K
WILHC12R
KEY
Glass Ceramics Carbon Fibre,
Re-inforced plastics
Plywood, Plastics hardwood,
softwood, chipboard
Quick cut
Straight cut
Curved saw Reverse blade teeth
All care has been taken to ensure information in this catalogue is accurate. However we reserve the right to make corrections without notification.
5-4