Page 250 - Roberston & Sinclair Catalogue
P. 250
Drilling and Boring
Diamond Tile Drills
High performance hole saws for drilling small diameter holes in many non-metallics. These diamond edge hole saws are produced with a uniform coating of synthetic diamond grit bonded to a durable steel platform. Diamond edge saws produce clean, accurate cuts on brick, glass, ceramic tiles and stone.
Features:
• Able to cut rapidly through porcelain, glass, ceramics, brick and stone.
• Perfect for kitchen and bathroom installations. • Smooth surface finish.
• Drive arbor and drill not required.
• Maximum cutting depth of 30mm (1.3/16”).
DIAMOND TILE DRILL GUIDE
Used in place of a pilot bit to eliminate hole saw ‘walking’ and prevent damage to work surfaces. The guide is manufactured with rubber feet, allowing user to secure it in place without scratching work surface.
PART NO
STRDTDG01
Hole Saw Depth
Rec. <3mm Cutting 3-13mm
Depth >13mm
Ceramic
Porcelain / Glass / Stone
Fibreglass
Brick and Masonry
STRKDTD-EVA 6
STRD0005 STRD0006 STRD0065 STRD0008 STRD0010 STRD0012
5mm 3/16”
PART NO
SIZE
mm
Inch
30mm 1.3/16”
6mm
6,5mm 1/4”
8mm 5/16” 10mm 3/8” 12mm 1/2”
15/64”
Cutting Performance
Excellent
Satisfactory
PART NO
NUMBER OF SAWS
DIAMETER OF DRILL BITS ACCESSORIES
5mm (3/16”), 6mm (15/64”), 6,5mm (1/4”), 8mm (5/16”), 10mm (25/64”), 12mm (15/32”)
Tile drill guide, water dispenser and knock out
pins
Diamond tile drills and hole saws must always be cooled with water!
PART NO
STRWCD01
PHONE 0800 866 546
EMAIL sales@rands.co.nz WEB www.RandS.co.nz
7-23
