Page 291 - Roberston & Sinclair Catalogue
P. 291
Portable Power Tools
CNC Tools
P-SYSTEM CNC DRILL BIT
P-System CNC Drill Bit
6mm, solid carbide, for mitres, L=100 / 35mm, shaft=10
P-System CNC Groove Cutter, Ø 100.4 x 7
x 30mm, 4 / 6.6 / DTK 48mm, Z3
x 30mm, 4 / 6.6 / DTK 48mm, Z6 Suitable for all cutter arbors listed below
x 40mm, 4 / 5.5 / DTK 52mm, Z3
E.g for angle aggregates, Flex 5, Flex 5+
x 16mm, 4 / 5.5 / DTK 28mm, Z3 E.g for corner notching aggregate
P-System CNC Cutter Arbors 30 / DTK 48mm
Shaft Ø 20 x 50, L=102mm Shaft Ø 25 x 60, L=102mm Shaft Ø 16 x 50, L=85mm Shaft Ø 16 x 55, L=68mm
Shaft Ø 16 x 50, L=85mm, with clamping surface(2 -angle)
E.g for aggregate for door locks
Shaft Ø 20 x 50, L=85mm, with clamping surface(2 -angle)
E.g for aggregate for door locks
Part No
LAM131556
Part No
LAM132142 LAM132142
LAM132143 LAM132144
Part No
LAM132150 LAM132151 LAM132152 LAM132153
LAM132154
LAM132155
P-SYSTEM CNC GROOVE CUTTER
P-SYSTEM CNC CUTTER ARBORS
POSSIBLE COMBINATION OF CNC MACHINES AND ZETA P2
Positioning Pins for Zeta P2
Ø 5mm, 1 pairs Ø 8mm, 1 pairs
Part No
LAM251048 LAM251066
Instead of using an angle aggregate, the Zeta P2 power tool can be used to cut the P-System groove in the centre of the surface. To do so, drill two 5mm positioning holes spaced at 101mm in the work piece surface using the CNC machine. These serve to position the Zeta P2 on the workpiece.
PHONE 0800 866 546 EMAIL sales@rands.co.nz WEB www.RandS.co.nz
9-22